# 'Blocky' reflection pass

**URL:** <https://forums.chaos.com/t/blocky-reflection-pass/113106>\
**Category:** Issues\
**Created:** [December 5, 2022, 3:33pm UTC](https://forums.chaos.com/t/blocky-reflection-pass/113106 "2022-12-05T15:33:29Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![Pixelcon](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/pixelcon/32/22319_2.png) [@Pixelcon](https://forums.chaos.com/u/Pixelcon)\
**Post date:** [December 5, 2022, 3:33pm UTC](https://forums.chaos.com/t/blocky-reflection-pass/113106/1 "2022-12-05T15:33:29Z")

</div>

Is this expected behavior? The tile-looking pattern does not represent the geometry’s makup.

Hard to know what information to supply in this case other than a 2gb file + assets, so let me know what other info might help diagnostics…

 ![image.png](https://europe1.discourse-cdn.com/chaosprd/original/3X/6/9/69bb1a7112db23f781fe73477d5a98041cb7462b.png)​​

---

<div class="post-metadata">

**Author:** ![vladimir\_krastev](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/vladimir_krastev/32/42177_2.png) [@vladimir\_krastev](https://forums.chaos.com/u/vladimir_krastev)\
**Post date:** [December 6, 2022, 3:59pm UTC](https://forums.chaos.com/t/blocky-reflection-pass/113106/2 "2022-12-06T15:59:40Z")

</div>

Hi, thanks for posting. I am afraid there is no other way but reviewing the scene. Please try to simplify it and send it. You can use our [support contact form](https://support.chaos.com/hc/en-us/requests/new) for that. Please include a link to this thread in you e-mail.

---

<div class="post-metadata">

**Author:** ![Pixelcon](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/pixelcon/32/22319_2.png) [@Pixelcon](https://forums.chaos.com/u/Pixelcon)\
**Post date:** [December 7, 2022, 8:35am UTC](https://forums.chaos.com/t/blocky-reflection-pass/113106/3 "2022-12-07T08:35:05Z")

</div>

> [@vladimir\_krastev](#):
>
> Hi, thanks for posting. I am afraid there is no other way but reviewing the scene. Please try to simplify it and send it. You can use our [support contact form](https://support.chaos.com/hc/en-us/requests/new) for that. Please include a link to this thread in you e-mail.

Done! .  
.  
.  
.  
.

---

<div class="post-metadata">

**Author:** ![Joelaff](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/joelaff/32/71647_2.png) [@Joelaff](https://forums.chaos.com/u/Joelaff)\
**Post date:** [December 7, 2022, 9:21pm UTC](https://forums.chaos.com/t/blocky-reflection-pass/113106/4 "2022-12-07T21:21:45Z")

</div>

Overlapping polygons?

---

<div class="post-metadata">

**Author:** ![Pixelcon](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/pixelcon/32/22319_2.png) [@Pixelcon](https://forums.chaos.com/u/Pixelcon)\
**Post date:** [December 8, 2022, 9:14am UTC](https://forums.chaos.com/t/blocky-reflection-pass/113106/5 "2022-12-08T09:14:02Z")

</div>

> [@Joelaff](#):
>
> Overlapping polygons?

No not from what I can tell.

---

<div class="post-metadata">

**Author:** ![vladimir\_krastev](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/vladimir_krastev/32/42177_2.png) [@vladimir\_krastev](https://forums.chaos.com/u/vladimir_krastev)\
**Post date:** [December 12, 2022, 1:05pm UTC](https://forums.chaos.com/t/blocky-reflection-pass/113106/6 "2022-12-12T13:05:27Z")

</div>

Hi, I tried to reset your render settings to default. I think it all renders fine after this, check it out:

RGB

 ![3dsmax_2022-12-12_15-00-10.jpg](https://europe1.discourse-cdn.com/chaosprd/original/2X/2/253e26d2ae2dc701fc0cba10d7f4c840cd6b44bf.jpeg)

Reflection

 ![3dsmax_2022-12-12_15-00-24.jpg](https://europe1.discourse-cdn.com/chaosprd/original/2X/a/a30a01ca8f531f17908200bccb38d77b2f3de687.jpeg)

---

<div class="post-metadata">

**Author:** ![Pixelcon](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/pixelcon/32/22319_2.png) [@Pixelcon](https://forums.chaos.com/u/Pixelcon)\
**Post date:** [December 12, 2022, 1:18pm UTC](https://forums.chaos.com/t/blocky-reflection-pass/113106/7 "2022-12-12T13:18:07Z")

</div>

Ok! Thanks for looking into it 🙂

---

<div class="post-metadata">

**Author:** ![Joelaff](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/joelaff/32/71647_2.png) [@Joelaff](https://forums.chaos.com/u/Joelaff)\
**Post date:** [December 13, 2022, 1:21am UTC](https://forums.chaos.com/t/blocky-reflection-pass/113106/8 "2022-12-13T01:21:54Z")

</div>

So what the heck would have caused that, though? Can you do a diff on the settings @vladimir_krastev ?

---

<div class="post-metadata">

**Author:** ![Pixelcon](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/pixelcon/32/22319_2.png) [@Pixelcon](https://forums.chaos.com/u/Pixelcon)\
**Post date:** [December 14, 2022, 9:53am UTC](https://forums.chaos.com/t/blocky-reflection-pass/113106/9 "2022-12-14T09:53:06Z")

</div>

Here it is.

 ![image.png](https://europe1.discourse-cdn.com/chaosprd/original/3X/2/9/291186fa3da51f30d8fe6b4a38edd98ccebeb930.png)  
​

Looks like it’s to do with retrace threshold. I generally turn this off as render times explode when it’s on.  
In the case of this small region it’s almost 30% slower with it switched on.

With retrace OFF (blocky artefacts present) and switching ‘store direct light’ → Off, it fixes the issue on the column as you can see here:

 ![image.jpg](https://europe1.discourse-cdn.com/chaosprd/original/3X/d/e/de2e3f61ffbb5514d3006af5faf2c7d60608e13a.jpeg) ![image.jpg](https://europe1.discourse-cdn.com/chaosprd/original/3X/9/f/9fbe4ad46ffba14c563408b5251c1d1df5dc5b0f.jpeg)​

But the ceiling’s issue is still present.

​​

---

<div class="post-metadata">

**Author:** ![vladimir\_krastev](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/vladimir_krastev/32/42177_2.png) [@vladimir\_krastev](https://forums.chaos.com/u/vladimir_krastev)\
**Post date:** [December 14, 2022, 10:32am UTC](https://forums.chaos.com/t/blocky-reflection-pass/113106/10 "2022-12-14T10:32:51Z")

</div>

> Looks like it’s to do with retrace threshold.

Definitely. Now that you bring it up I recall having similar issues when rendering interiors in the past. I used to lower it as well, but not turn it off completely.  
In my experience it is mostly needed with bad geometry. I used to set it to 0.5 I think but this value does not work in every scene. You can test the lowest value that works.

 ![3dsmax_2022-12-14_12-32-20.jpg](https://europe1.discourse-cdn.com/chaosprd/original/3X/e/1/e1bc29b8c88fe092b1577d649520a24c1ad432c5.jpeg)

---

<div class="post-metadata">

**Author:** ![\_Lele](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/_lele/32/49986_2.png) [@\_Lele](https://forums.chaos.com/u/_Lele)\
**Post date:** [December 14, 2022, 4:04pm UTC](https://forums.chaos.com/t/blocky-reflection-pass/113106/11 "2022-12-14T16:04:26Z")

</div>

Retrace should _always_ be on for the LC for final rendering.  
It’s a toggle, one may want the LC as primary engine too, for purposes other than photoreal rendering (f.e. as a painterly pass, or a super quick preview of light distribution. Both would be defeated by retracing.).  
The painterly effect however worked better for the old LC as it had rounder samples, and a different screen distribution.  
The quick preview may work as well now, with some tweaking to the LC settings.

Retrace is the part of the rendering algo that decides an LC sample is not in fact expressive of the shading needed, and per-pixel sampling should instead be used: turning it off produces precisely the results you see, as any LC sample is considered fine and rendered as is, light leaks included.  
Primary samples are generally fine, but anything through reflection and refraction is often problematic, and needs retracing (hence the issues seen in that RE).

Analogously, you should not turn off “Store direct light” as you’d lose a big chunk of LC performance.

You can check in the Log what percentage of the LC has been used -directly- in the final render: it’s often around 20 to 30%, the rest is being retraced.

TL;DR: Trust the defaults, they have been chosen for non arbitrary reasons.

---

<div class="post-metadata">

**Author:** ![Pixelcon](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/pixelcon/32/22319_2.png) [@Pixelcon](https://forums.chaos.com/u/Pixelcon)\
**Post date:** [December 14, 2022, 4:08pm UTC](https://forums.chaos.com/t/blocky-reflection-pass/113106/12 "2022-12-14T16:08:59Z")

</div>

I know that the defaults will generally give the ‘best results’, but at some point a render that can be 30-50% faster with retrace turned off is worth it, despite the artefacts it might bring. Some of us don’t have the luxury to wait anything longer than 6 hours for a render nor do we have the money required to overcome this with raw computing power.

---

<div class="post-metadata">

**Author:** ![\_Lele](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/_lele/32/49986_2.png) [@\_Lele](https://forums.chaos.com/u/_Lele)\
**Post date:** [December 14, 2022, 4:12pm UTC](https://forums.chaos.com/t/blocky-reflection-pass/113106/13 "2022-12-14T16:12:09Z")

</div>

> [@Pixelcon](#):
>
> I know that the defaults will generally give the ‘best results’, but at some point a render that can be 30-50% faster with retrace turned off is worth it, despite the artefacts it might bring.

Well, if it was you wouldn’t be here. 🙂  
As it is, it costed you more time than rendering at defaults, with slightly higher noise threshold, and then denoise the result.

Never have i suggested that one should wait forever for renders to complete…

---

<div class="post-metadata">

**Author:** ![Pixelcon](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/pixelcon/32/22319_2.png) [@Pixelcon](https://forums.chaos.com/u/Pixelcon)\
**Post date:** [December 14, 2022, 4:14pm UTC](https://forums.chaos.com/t/blocky-reflection-pass/113106/14 "2022-12-14T16:14:47Z")

</div>

hey I can live with a blocky reflection pass, I’m just trying to help with reporting bugs.

Can I give you a file for you to have a play with? It’s a fierce monster that I think is probably a challenge for any rendering engine…I can’t show it here, but I’d be really interested to see if you can get a reasonable render time with retrace switched on (or even with default settings).

---

<div class="post-metadata">

**Author:** ![\_Lele](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/_lele/32/49986_2.png) [@\_Lele](https://forums.chaos.com/u/_Lele)\
**Post date:** [December 14, 2022, 4:18pm UTC](https://forums.chaos.com/t/blocky-reflection-pass/113106/15 "2022-12-14T16:18:48Z")

</div>

Sure, send it over, i’ll be too happy to give it a go!  
At the very least i should be able to mention to you what are the main performance killers.

But what i’m trying to say is that it’s not a bug, it’s the expected behaviour for the LC in a set of situations, when retrace is off.  
I’m actually unsure if we left the toggle in the UI for other specific cases that deal with final production rendering, or if it is a leftover.  
I’ll investigate and report back.

---

<div class="post-metadata">

**Author:** ![Pixelcon](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/pixelcon/32/22319_2.png) [@Pixelcon](https://forums.chaos.com/u/Pixelcon)\
**Post date:** [December 14, 2022, 4:20pm UTC](https://forums.chaos.com/t/blocky-reflection-pass/113106/16 "2022-12-14T16:20:05Z")

</div>

> [@\_Lele](#):
>
> But what i’m trying to say is that it’s not a bug, it’s the expected behaviour for the LC in a set of situations, when retrace is off.

Understood 🙂

I will send this file over sooner or later this week.

---

<div class="post-metadata">

**Author:** ![\_Lele](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/_lele/32/49986_2.png) [@\_Lele](https://forums.chaos.com/u/_Lele)\
**Post date:** [December 14, 2022, 4:28pm UTC](https://forums.chaos.com/t/blocky-reflection-pass/113106/17 "2022-12-14T16:28:44Z")

</div>

I asked Vlado for confirmation (he’s the author), it should indeed be always left on: the current implementation of the LC requires it so.

---

<div class="post-metadata">

**Author:** ![kosso\_olli](https://avatars.discourse-cdn.com/v4/letter/k/dfb087/32.png) [@kosso\_olli](https://forums.chaos.com/u/kosso_olli)\
**Post date:** [December 15, 2022, 10:17am UTC](https://forums.chaos.com/t/blocky-reflection-pass/113106/18 "2022-12-15T10:17:24Z")

</div>

> [@\_Lele](#):
>
> I asked Vlado for confirmation (he’s the author), it should indeed be always left on: the current implementation of the LC requires it so.

Then it would be best to get rid of the checkbox, as it evidently creates artifacts and confusion.

---

<div class="post-metadata">

**Author:** ![Pixelcon](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/pixelcon/32/22319_2.png) [@Pixelcon](https://forums.chaos.com/u/Pixelcon)\
**Post date:** [December 15, 2022, 10:19am UTC](https://forums.chaos.com/t/blocky-reflection-pass/113106/19 "2022-12-15T10:19:59Z")

</div>

> [@kosso\_olli](#):
>
> Then it would be best to get rid of the checkbox, as it evidently creates artifacts and confusion.

Or perhaps hide it with the basic/advanced UI modes.

---

<div class="post-metadata">

**Author:** ![\_Lele](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/_lele/32/49986_2.png) [@\_Lele](https://forums.chaos.com/u/_Lele)\
**Post date:** [December 15, 2022, 10:31am UTC](https://forums.chaos.com/t/blocky-reflection-pass/113106/20 "2022-12-15T10:31:22Z")

</div>

Agreed on both points. 🙂

[Next page](https://forums.chaos.com/t/blocky-reflection-pass/113106.md?page=2)
