# Dirt

**URL:** <https://forums.chaos.com/t/dirt/89299>\
**Category:** General\
**Created:** [June 18, 2018, 1:18pm UTC](https://forums.chaos.com/t/dirt/89299 "2018-06-18T13:18:39Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![ValeroStudio](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/valerostudio/32/31524_2.png) [@ValeroStudio](https://forums.chaos.com/u/ValeroStudio)\
**Post date:** [June 18, 2018, 1:18pm UTC](https://forums.chaos.com/t/dirt/89299/1 "2018-06-18T13:18:39Z")

</div>

I was looking to use dirt as an opacity map for a layered material but I can’t seem to get the black to be black, it looks more like 50% gray. Anyone know why this is?

 ![.jpg.jpg](https://europe1.discourse-cdn.com/chaosprd/original/3X/2/a/2a298b437eefe432001402a0b2a02083312b9450.jpeg)

---

<div class="post-metadata">

**Author:** ![Peter.Chaushev](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/peter.chaushev/32/66949_2.png) [@Peter.Chaushev](https://forums.chaos.com/u/Peter.Chaushev)\
**Post date:** [June 21, 2018, 3:12pm UTC](https://forums.chaos.com/t/dirt/89299/2 "2018-06-21T15:12:07Z")

</div>

You can strengthen a Curvature or Dirt map by slotting it in a Simple Mix texture and using a value higher than 1 for _Multiply Result_ and then using the result as a blend map in Blend Material.

---

<div class="post-metadata">

**Author:** ![FrankGehry](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/frankgehry/32/72662_2.png) [@FrankGehry](https://forums.chaos.com/u/FrankGehry)\
**Post date:** [June 22, 2018, 7:35pm UTC](https://forums.chaos.com/t/dirt/89299/3 "2018-06-22T19:35:51Z")

</div>

> [@ValeroStudio](#):
>
> AMAZING!!! Thank you!
> 
> In this case I just used it as an opacity map of 2 BRDFs stacked on each other.

Would you mind attaching the material file so I can see this technique?

---

<div class="post-metadata">

**Author:** ![ValeroStudio](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/valerostudio/32/31524_2.png) [@ValeroStudio](https://forums.chaos.com/u/ValeroStudio)\
**Post date:** [June 25, 2018, 2:47pm UTC](https://forums.chaos.com/t/dirt/89299/4 "2018-06-25T14:47:55Z")

</div>

> [@FrankGehry](#):
>
> Would you mind attaching the material file so I can see this technique?

Only if you tell me if you are the real Frank Gehry. 😄

---

<div class="post-metadata">

**Author:** ![ValeroStudio](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/valerostudio/32/31524_2.png) [@ValeroStudio](https://forums.chaos.com/u/ValeroStudio)\
**Post date:** [June 25, 2018, 2:51pm UTC](https://forums.chaos.com/t/dirt/89299/5 "2018-06-25T14:51:23Z")

</div>

Here is the vrmat file… Mr. Gehry 🕶  
[Worn Edge Metal.zip](https://forums.chaos.com/uploads/short-url/b2Bo9l5WUErKocpnIE4MQNzcwZi.zip) (98.9 KB)

---

<div class="post-metadata">

**Author:** ![FrankGehry](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/frankgehry/32/72662_2.png) [@FrankGehry](https://forums.chaos.com/u/FrankGehry)\
**Post date:** [June 25, 2018, 7:43pm UTC](https://forums.chaos.com/t/dirt/89299/6 "2018-06-25T19:43:09Z")

</div>

> [@ValeroStudio](#):
>
> Here is the vrmat file… Mr. Gehry 🕶

Thanks for attaching the vrmat file! Unfortunately, I’m not the real Frank Gehry…I wish haha.

I’m having an issue loading your vrmat file into V-Ray, and I’m not really sure what’s causing it. I don’t think it has anything to do with your file. If possible, could you attach screenshots of the material settings?

I appreciate you going through this trouble for me!

FG

---

<div class="post-metadata">

**Author:** ![FrankGehry](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/frankgehry/32/72662_2.png) [@FrankGehry](https://forums.chaos.com/u/FrankGehry)\
**Post date:** [June 26, 2018, 10:17pm UTC](https://forums.chaos.com/t/dirt/89299/7 "2018-06-26T22:17:16Z")

</div>

> [@ValeroStudio](#):
>
> 2 stacked BRDF metals - the bottom is the gray color and the top is the shiny silver metal  
> The Opacity on the top layer is set to Simple Mix with the multiply set to 5  
> In the color / Texture map is a Dirt tex  
> The Occluded color on the Dirt settings is a Cellular procedural to give some varying worn texture.

Thank you, I got it to work this time!

---

<div class="post-metadata">

**Author:** ![ValeroStudio](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/valerostudio/32/31524_2.png) [@ValeroStudio](https://forums.chaos.com/u/ValeroStudio)\
**Post date:** [June 27, 2018, 12:33pm UTC](https://forums.chaos.com/t/dirt/89299/8 "2018-06-27T12:33:57Z")

</div>

Awesome! Now you can use this technique for all kinds of grunge and effects.

---

<div class="post-metadata">

**Author:** ![teknoel](https://avatars.discourse-cdn.com/v4/letter/t/ee59a6/32.png) [@teknoel](https://forums.chaos.com/u/teknoel)\
**Post date:** [July 13, 2018, 5:30pm UTC](https://forums.chaos.com/t/dirt/89299/9 "2018-07-13T17:30:37Z")

</div>

Very cool! Thanks
