# Dynamic Memory Limit and Deafault Geometry

**URL:** <https://forums.chaos.com/t/dynamic-memory-limit-and-deafault-geometry/41058>\
**Category:** General\
**Created:** [April 13, 2012, 11:40am UTC](https://forums.chaos.com/t/dynamic-memory-limit-and-deafault-geometry/41058 "2012-04-13T11:40:37Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![pixela](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/pixela/32/2876_2.png) [@pixela](https://forums.chaos.com/u/pixela)\
**Post date:** [April 13, 2012, 11:40am UTC](https://forums.chaos.com/t/dynamic-memory-limit-and-deafault-geometry/41058/1 "2012-04-13T11:40:37Z")

</div>

I read the manual couple of times and searched the forum as well but still feel confused about these settings.

This is what I typically do:  
I set dynamic memory limit 20GB/24GB and set the default geometry “auto”, or  
I set dynamic memory limit 14GB/16GB and set the default geometry “auto”

But recently one colleague told me that he lowered the memory limit and got faster render times.

I think I don´t have a good understanding of this specific setting and the manual is not clear to me.  
I need someone to explain in detail about this setting and the render times.

---

<div class="post-metadata">

**Author:** ![vlado](https://avatars.discourse-cdn.com/v4/letter/v/779978/32.png) [@vlado](https://forums.chaos.com/u/vlado)\
**Post date:** [April 13, 2012, 12:05pm UTC](https://forums.chaos.com/t/dynamic-memory-limit-and-deafault-geometry/41058/2 "2012-04-13T12:05:51Z")

</div>

> [@Lense Effects and saving .vrimg or .exr from the vray frame buffer](https://forums.chaos.com/t/lense-effects-and-saving-vrimg-or-exr-from-the-vray-frame-buffer/26915/7):
>
> But recently one colleague told me that he lowered the memory limit and got faster render times.

This would only happen if his scene was heavy and he had set the memory limit so high that Windows had to swap parts of the memory to disk.

Best regards,  
Vlado

---

<div class="post-metadata">

**Author:** ![pixela](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/pixela/32/2876_2.png) [@pixela](https://forums.chaos.com/u/pixela)\
**Post date:** [April 13, 2012, 12:10pm UTC](https://forums.chaos.com/t/dynamic-memory-limit-and-deafault-geometry/41058/3 "2012-04-13T12:10:09Z")

</div>

So what I do is correct ?  
To set the dynamic memory limit to 90% of physical RAM and leaving the geometry at “auto” is best?

---

<div class="post-metadata">

**Author:** ![vlado](https://avatars.discourse-cdn.com/v4/letter/v/779978/32.png) [@vlado](https://forums.chaos.com/u/vlado)\
**Post date:** [April 13, 2012, 12:11pm UTC](https://forums.chaos.com/t/dynamic-memory-limit-and-deafault-geometry/41058/4 "2012-04-13T12:11:38Z")

</div>

> [@AlanMc](#):
>
> So what I do is correct ?  
> To set the dynamic memory limit to 90% of physical RAM and leaving the geometry at “auto” is best?

I think this is a good approach, yes.

Best regards,  
Vlado

---

<div class="post-metadata">

**Author:** ![pixela](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/pixela/32/2876_2.png) [@pixela](https://forums.chaos.com/u/pixela)\
**Post date:** [April 13, 2012, 12:13pm UTC](https://forums.chaos.com/t/dynamic-memory-limit-and-deafault-geometry/41058/5 "2012-04-13T12:13:42Z")

</div>

Thanks a lot for your fast feedback Vlado 🙂

So when should we set the geometry to Dynamic or Static (I just want to learn to grab a better understanding of the render theory) ?

---

<div class="post-metadata">

**Author:** ![m\_hinks](https://avatars.discourse-cdn.com/v4/letter/m/7feea3/32.png) [@m\_hinks](https://forums.chaos.com/u/m_hinks)\
**Post date:** [April 16, 2012, 7:23am UTC](https://forums.chaos.com/t/dynamic-memory-limit-and-deafault-geometry/41058/6 "2012-04-16T07:23:50Z")

</div>

“In V-Ray 2.0 and later, you can set this to 0 to remove any limit in that case, V-Ray will take as much memory as needed.”

So maybe using the 90% rule is the best option, not just set to 0?

---

<div class="post-metadata">

**Author:** ![kiteman](https://avatars.discourse-cdn.com/v4/letter/k/b38774/32.png) [@kiteman](https://forums.chaos.com/u/kiteman)\
**Post date:** [April 16, 2012, 8:50am UTC](https://forums.chaos.com/t/dynamic-memory-limit-and-deafault-geometry/41058/7 "2012-04-16T08:50:59Z")

</div>

Pixela, you can look at this article, served me a lot to learn its operation.  
[http://www.chaosgroup.com/forums/vbulletin/showthread.php?65796-Interesting-article-about-raycasting-of-Vray&highlight=Raycasting](http://www.chaosgroup.com/forums/vbulletin/showthread.php?65796-Interesting-article-about-raycasting-of-Vray&highlight=Raycasting)

Regards.

---

<div class="post-metadata">

**Author:** ![pixela](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/pixela/32/2876_2.png) [@pixela](https://forums.chaos.com/u/pixela)\
**Post date:** [April 16, 2012, 2:20pm UTC](https://forums.chaos.com/t/dynamic-memory-limit-and-deafault-geometry/41058/8 "2012-04-16T14:20:29Z")

</div>

Thank you this is very good.
