# Extra\_Tex not motion blurring and AA?

**URL:** <https://forums.chaos.com/t/extra-tex-not-motion-blurring-and-aa/25265>\
**Category:** Issues\
**Created:** [September 10, 2010, 6:50pm UTC](https://forums.chaos.com/t/extra-tex-not-motion-blurring-and-aa/25265 "2010-09-10T18:50:00Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![mr\_furious](https://avatars.discourse-cdn.com/v4/letter/m/e36b37/32.png) [@mr\_furious](https://forums.chaos.com/u/mr_furious)\
**Post date:** [September 10, 2010, 6:50pm UTC](https://forums.chaos.com/t/extra-tex-not-motion-blurring-and-aa/25265/1 "2010-09-10T18:50:00Z")

</div>

I have a dirt texture pumping into a Extra\_Tex render element for an AO pass. The Extra\_Tex Render element does not motion blur or AA is this right? The other render elements filter and moblur fine? Am i using this correctly?

i am using build 12574?

Andy

---

<div class="post-metadata">

**Author:** ![mr\_furious](https://avatars.discourse-cdn.com/v4/letter/m/e36b37/32.png) [@mr\_furious](https://forums.chaos.com/u/mr_furious)\
**Post date:** [September 10, 2010, 6:53pm UTC](https://forums.chaos.com/t/extra-tex-not-motion-blurring-and-aa/25265/2 "2010-09-10T18:53:00Z")

</div>

i have both considerforaa and affectmattes both set to 1

---

<div class="post-metadata">

**Author:** ![vlado](https://avatars.discourse-cdn.com/v4/letter/v/779978/32.png) [@vlado](https://forums.chaos.com/u/vlado)\
**Post date:** [September 10, 2010, 6:57pm UTC](https://forums.chaos.com/t/extra-tex-not-motion-blurring-and-aa/25265/3 "2010-09-10T18:57:13Z")

</div>

Can you show a crop of the image? Something else is probably going on, since all the render elements are computed from the same camera rays/intersections - there is no possibility that one element will not be motion blurred.

Best regards,  
Vlado

---

<div class="post-metadata">

**Author:** ![mr\_furious](https://avatars.discourse-cdn.com/v4/letter/m/e36b37/32.png) [@mr\_furious](https://forums.chaos.com/u/mr_furious)\
**Post date:** [September 10, 2010, 7:52pm UTC](https://forums.chaos.com/t/extra-tex-not-motion-blurring-and-aa/25265/4 "2010-09-10T19:52:30Z")

</div>

here is a crop of the image.

i just created a vray dirt texture and connected it to the Extra\_Tex render element. Both images are from the same render.

A  
 ![crop.jpg](https://europe1.discourse-cdn.com/chaosprd/original/3X/1/2/12229bb2b81f21f24fb3521ab96af3c888d639d3.jpeg)

---

<div class="post-metadata">

**Author:** ![mr\_furious](https://avatars.discourse-cdn.com/v4/letter/m/e36b37/32.png) [@mr\_furious](https://forums.chaos.com/u/mr_furious)\
**Post date:** [September 10, 2010, 7:56pm UTC](https://forums.chaos.com/t/extra-tex-not-motion-blurring-and-aa/25265/5 "2010-09-10T19:56:46Z")

</div>

This also brings up the disussion of a dedicated AO pass. just jumping back into Vray… i’m sure you’ve kicked it around in the forum before.. but having an AO render element even though it’s not “correct” is something compositors ask for all the time.. and like it or not it helps.

nine times out of ten just blasting an AO texture like this will work… but often it doesn’t when you have a lot of bump/normal maps and displacements. Then you have to go through making an extra set of shaders just for the AO and that can be very time consuming? I’m assuming at least with an AO render element it would take the already setup bump/normal/displacement maps into account.

Any thoughts of just an AO Render Element… (no matter how incorrect it maybe?)

just my .02

Andy

---

<div class="post-metadata">

**Author:** ![vlado](https://avatars.discourse-cdn.com/v4/letter/v/779978/32.png) [@vlado](https://forums.chaos.com/u/vlado)\
**Post date:** [September 10, 2010, 8:01pm UTC](https://forums.chaos.com/t/extra-tex-not-motion-blurring-and-aa/25265/6 "2010-09-10T20:01:17Z")

</div>

Do you have the “Filtering” attribute enabled in the extra tex element?

Best regards,  
Vlado

---

<div class="post-metadata">

**Author:** ![mr\_furious](https://avatars.discourse-cdn.com/v4/letter/m/e36b37/32.png) [@mr\_furious](https://forums.chaos.com/u/mr_furious)\
**Post date:** [September 10, 2010, 8:08pm UTC](https://forums.chaos.com/t/extra-tex-not-motion-blurring-and-aa/25265/7 "2010-09-10T20:08:14Z")

</div>

yep… that was the first thing i checked.

A

---

<div class="post-metadata">

**Author:** ![mr\_furious](https://avatars.discourse-cdn.com/v4/letter/m/e36b37/32.png) [@mr\_furious](https://forums.chaos.com/u/mr_furious)\
**Post date:** [September 10, 2010, 8:09pm UTC](https://forums.chaos.com/t/extra-tex-not-motion-blurring-and-aa/25265/8 "2010-09-10T20:09:49Z")

</div>

let me see if i can re-created it with a simple scene and send it to you.

but its litterally make dirt texure… make Extra\_Tex …connect to Extra\_Tex

I am using an object that has point cache animation data… but everything else moblurs and filters…

A

---

<div class="post-metadata">

**Author:** ![vlado](https://avatars.discourse-cdn.com/v4/letter/v/779978/32.png) [@vlado](https://forums.chaos.com/u/vlado)\
**Post date:** [September 10, 2010, 8:17pm UTC](https://forums.chaos.com/t/extra-tex-not-motion-blurring-and-aa/25265/9 "2010-09-10T20:17:30Z")

</div>

If you can get me the scene, it will help, as it works fine here on a simple test.

Best regards,  
Vlado

---

<div class="post-metadata">

**Author:** ![mr\_furious](https://avatars.discourse-cdn.com/v4/letter/m/e36b37/32.png) [@mr\_furious](https://forums.chaos.com/u/mr_furious)\
**Post date:** [September 10, 2010, 9:36pm UTC](https://forums.chaos.com/t/extra-tex-not-motion-blurring-and-aa/25265/10 "2010-09-10T21:36:45Z")

</div>

got it to work… i was scripting it … .to create that render element … and i missed the filter button.

sorry for the drama! 🙂

A

---

<div class="post-metadata">

**Author:** ![vlado](https://avatars.discourse-cdn.com/v4/letter/v/779978/32.png) [@vlado](https://forums.chaos.com/u/vlado)\
**Post date:** [September 10, 2010, 9:43pm UTC](https://forums.chaos.com/t/extra-tex-not-motion-blurring-and-aa/25265/11 "2010-09-10T21:43:26Z")

</div>

No problem, glad it’s sorted out 🙂

Best regards,  
Vlado
