# Failure : Masterizing SampleRate

**URL:** <https://forums.chaos.com/t/failure-masterizing-samplerate/46944>\
**Category:** Render Theory\
**Created:** [November 15, 2013, 10:40am UTC](https://forums.chaos.com/t/failure-masterizing-samplerate/46944 "2013-11-15T10:40:32Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![fraggle](https://avatars.discourse-cdn.com/v4/letter/f/34f0e0/32.png) [@fraggle](https://forums.chaos.com/u/fraggle)\
**Post date:** [November 15, 2013, 10:40am UTC](https://forums.chaos.com/t/failure-masterizing-samplerate/46944/1 "2013-11-15T10:40:32Z")

</div>

Hello,  
I don’t want to pollute the fantastic thread "Understanding DMC Sampler ", so I started a new one instead.  
I’m trying to reproduced the best technic described in this tread, but frankly, the result is disappointing, very very long render time and bad quality (7hours here, using IM + LC!!!)  
1 HDRI dome light, trough several windows with sky portal vray plane, and some spot (but not powerful enough to light anything compare to the skyportal).  
Light sampling have been boost to 256 and the material sampling to 96.

Red Area= oversampling : supposed to be only on the edges (where oversampling are necessary). But looking at the RGB, it’s still very noisy, especially inside the hood  
Green, yellow area = what does it means? Looking at the walls, there is still a lot of “shadow spot”, making blurry aspect, like a noise map in the material (but it is not the case)  
The scene have a lot of reflection material, could it be the guilty element?  
Looking at the size of the sample file (550Mo!), It sounds there is too many sample or it doesn’t mean anything?  
Wondering if I am not a SR addict finally.

 ![GI.JPG](https://europe1.discourse-cdn.com/chaosprd/original/3X/c/c/cc3f2bb714d3e4d4d1b60895a7b5495dce5e416a.jpeg)  
 ![DMC.JPG](https://europe1.discourse-cdn.com/chaosprd/original/3X/8/0/808ac7deaad376283a832af0d75f4a74bd9cefd0.jpeg)  
 ![VRayBeauty.jpg](https://europe1.discourse-cdn.com/chaosprd/original/3X/5/6/56b30f702a4db28761d20547bdd3dedaff157c45.jpeg)  
 ![VRaySampleRate.jpg](https://europe1.discourse-cdn.com/chaosprd/original/2X/5/5df225e34f8da57340abe0e98236177396698d6f.jpeg)

---

<div class="post-metadata">

**Author:** ![Morne](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/morne/32/11335_2.png) [@Morne](https://forums.chaos.com/u/Morne)\
**Post date:** [November 15, 2013, 11:38am UTC](https://forums.chaos.com/t/failure-masterizing-samplerate/46944/2 "2013-11-15T11:38:43Z")

</div>

I would set the subs for the ir map to 60 and the interp samples to 40 (to begin with)

(try min shading rate at 1 instead of 2)

What is your AA set at?  
We will also have to see your refl element and gi element and lighting element

---

<div class="post-metadata">

**Author:** ![fraggle](https://avatars.discourse-cdn.com/v4/letter/f/34f0e0/32.png) [@fraggle](https://forums.chaos.com/u/fraggle)\
**Post date:** [November 15, 2013, 1:26pm UTC](https://forums.chaos.com/t/failure-masterizing-samplerate/46944/3 "2013-11-15T13:26:31Z")

</div>

Here it is:

AA set to Adaptive but there was no image filter anyway (to speed up the rendering)

Will test again, with your advice of 60/40, but tonight because 7h render time is really not good to fine tune render setting.

 ![VRayReflection.jpg](https://europe1.discourse-cdn.com/chaosprd/original/3X/e/c/eca10c64bedcc6731471fac91dad0eb73214d3bb.jpeg)  
 ![VRayGlobalIllumination.jpg](https://europe1.discourse-cdn.com/chaosprd/original/3X/4/e/4e036607b1ce5f8bc1114140ea9cd33cb58569d8.jpeg)

---

<div class="post-metadata">

**Author:** ![tricky](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/tricky/32/56653_2.png) [@tricky](https://forums.chaos.com/u/tricky)\
**Post date:** [November 15, 2013, 1:37pm UTC](https://forums.chaos.com/t/failure-masterizing-samplerate/46944/4 "2013-11-15T13:37:33Z")

</div>

typing in wrong place!

---

<div class="post-metadata">

**Author:** ![joconnell](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/joconnell/32/36063_2.png) [@joconnell](https://forums.chaos.com/u/joconnell)\
**Post date:** [November 15, 2013, 2:09pm UTC](https://forums.chaos.com/t/failure-masterizing-samplerate/46944/5 "2013-11-15T14:09:41Z")

</div>

Looking at this I’d say that your GI is the pass with all the problems in it which is kind of separate from the AA / sampling nonsense. Your samplerate pass is very red as you’ve got your colour threshold down at 0.003 which is insane. Put it back to 0.01, drop your aa to 1/16 which is generally fine for every render. Same with your DMC sampler threshold, put it back to 0.01 as this is probably okay too. Now try putting up your raw lighting and raw GI passes - I’d say all the crap and mottled look is all down to your GI - Having glossy surfaces reflecting in other glossy surfaces is a tough situation sampling wise too.

---

<div class="post-metadata">

**Author:** ![vlado](https://avatars.discourse-cdn.com/v4/letter/v/779978/32.png) [@vlado](https://forums.chaos.com/u/vlado)\
**Post date:** [November 18, 2013, 12:24am UTC](https://forums.chaos.com/t/failure-masterizing-samplerate/46944/6 "2013-11-18T00:24:44Z")

</div>

Like joconnell said, first try to figure out what exactly is causing the noise - the different render elements (lighting, GI, reflection, specular) can help you find out. Then increase the subdivs just for that component(s).

Best regards,  
Vlado

---

<div class="post-metadata">

**Author:** ![fraggle](https://avatars.discourse-cdn.com/v4/letter/f/34f0e0/32.png) [@fraggle](https://forums.chaos.com/u/fraggle)\
**Post date:** [December 6, 2013, 4:35pm UTC](https://forums.chaos.com/t/failure-masterizing-samplerate/46944/7 "2013-12-06T16:35:36Z")

</div>

Sorry, I’ve been taken by the swirl of life. Just got a new lovely baby girl and I struggle to keep everything done. But I will be back on this thread.

---

<div class="post-metadata">

**Author:** ![vlado](https://avatars.discourse-cdn.com/v4/letter/v/779978/32.png) [@vlado](https://forums.chaos.com/u/vlado)\
**Post date:** [December 6, 2013, 4:39pm UTC](https://forums.chaos.com/t/failure-masterizing-samplerate/46944/8 "2013-12-06T16:39:27Z")

</div>

> [@shave + vrayHairMtl3 + color maps](https://forums.chaos.com/t/shave-vrayhairmtl3-color-maps/43661/2):
>
> Sorry, I’ve been taken by the swirl of life. Just got a new lovely baby girl and I struggle to keep everything done.

Congratulations! 🙂

Best regards,  
Vlado

---

<div class="post-metadata">

**Author:** ![Donald2B](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/donald2b/32/3244_2.png) [@Donald2B](https://forums.chaos.com/u/Donald2B)\
**Post date:** [December 6, 2013, 5:38pm UTC](https://forums.chaos.com/t/failure-masterizing-samplerate/46944/9 "2013-12-06T17:38:46Z")

</div>

Congrats on the birth of your daughter! Now you will have plenty of time learning VRay when she is up crying at night! 😉

I 3rd what joconnell said. Sometimes, because we don’t understand what we are seeing, we start making lots of changes in many different areas of vray and then nothing seems to change. Once you learn how to break down where the problems are coming from, it will get a LOT easier!
