# How to setup the firewall for DR?

**URL:** <https://forums.chaos.com/t/how-to-setup-the-firewall-for-dr/48561>\
**Category:** General\
**Created:** [February 5, 2014, 4:03pm UTC](https://forums.chaos.com/t/how-to-setup-the-firewall-for-dr/48561 "2014-02-05T16:03:39Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![Micha](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/micha/32/59168_2.png) [@Micha](https://forums.chaos.com/u/Micha)\
**Post date:** [February 5, 2014, 4:03pm UTC](https://forums.chaos.com/t/how-to-setup-the-firewall-for-dr/48561/1 "2014-02-05T16:03:39Z")

</div>

Hi,

in the past I had no problem to use DR. I don’t used DR since a while, but today I have this problem at my Windows 7 machines:

dr host: 192.168.1.7:20215  
Could not connect to host 192.168.1.7:20215: Es konnte keine Verbindung hergestellt werden, da der Zielcomputer die Verbindung verweigerte.  
Could not use any of the selected (1) hosts for distributed rendering!

I use Avast and I’m not sure how to set up is so that DR works again? Which components of Vray should get all rights at the master firewall.

Ciao,  
Micha

---

<div class="post-metadata">

**Author:** ![Micha](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/micha/32/59168_2.png) [@Micha](https://forums.chaos.com/u/Micha)\
**Post date:** [February 5, 2014, 4:15pm UTC](https://forums.chaos.com/t/how-to-setup-the-firewall-for-dr/48561/2 "2014-02-05T16:15:35Z")

</div>

The german part of the error message says, that the target computer refuse the connection. So maybe it’s something to setup on the slave computer.

---

<div class="post-metadata">

**Author:** ![renee81](https://avatars.discourse-cdn.com/v4/letter/r/ce73a5/32.png) [@renee81](https://forums.chaos.com/u/renee81)\
**Post date:** [February 5, 2014, 4:39pm UTC](https://forums.chaos.com/t/how-to-setup-the-firewall-for-dr/48561/3 "2014-02-05T16:39:32Z")

</div>

I had that problem after installing a build in December and this is what Corey told me to do,and it works.

can you check to see if the VRLServer is running as a service on your DR nodes? If it is running as a service, please stop the service, set the Start Up Type property of the service to “manual”.

I just want to had that lately I have a problem again with the DR not every time,it is like the DR won’t let go of the license,when I go to check at localhost:30308 ar the license are busy.

---

<div class="post-metadata">

**Author:** ![Micha](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/micha/32/59168_2.png) [@Micha](https://forums.chaos.com/u/Micha)\
**Post date:** [February 5, 2014, 5:06pm UTC](https://forums.chaos.com/t/how-to-setup-the-firewall-for-dr/48561/4 "2014-02-05T17:06:56Z")

</div>

It doesn’t help. ☹

The service is visible at the task manager, but not started.

Thank you for your hint,  
Micha

---

<div class="post-metadata">

**Author:** ![renee81](https://avatars.discourse-cdn.com/v4/letter/r/ce73a5/32.png) [@renee81](https://forums.chaos.com/u/renee81)\
**Post date:** [February 5, 2014, 5:25pm UTC](https://forums.chaos.com/t/how-to-setup-the-firewall-for-dr/48561/5 "2014-02-05T17:25:32Z")

</div>

here the service is visible on the main machine ,not on the DR,when I look at the task manager

---

<div class="post-metadata">

**Author:** ![Micha](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/micha/32/59168_2.png) [@Micha](https://forums.chaos.com/u/Micha)\
**Post date:** [February 12, 2014, 6:54pm UTC](https://forums.chaos.com/t/how-to-setup-the-firewall-for-dr/48561/6 "2014-02-12T18:54:10Z")

</div>

The problem isn’t solved here and I would be glad if the support team could write please, what is needed to get the slaves running.

---

<div class="post-metadata">

**Author:** ![renee81](https://avatars.discourse-cdn.com/v4/letter/r/ce73a5/32.png) [@renee81](https://forums.chaos.com/u/renee81)\
**Post date:** [February 12, 2014, 8:41pm UTC](https://forums.chaos.com/t/how-to-setup-the-firewall-for-dr/48561/7 "2014-02-12T20:41:39Z")

</div>

Micha,

I use McAfee,and in my firewall setting xmldrspawner.exe have full access.

the file is located in c:\programdata\asgvis\common\x64\vc10\distributed rendering\xmldrspawner.exe

This is the only file related to Vray that is listed in my firewall

---

<div class="post-metadata">

**Author:** ![Micha](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/micha/32/59168_2.png) [@Micha](https://forums.chaos.com/u/Micha)\
**Post date:** [February 13, 2014, 7:54am UTC](https://forums.chaos.com/t/how-to-setup-the-firewall-for-dr/48561/8 "2014-02-13T07:54:35Z")

</div>

Looks like I found the reason. I deinstalled and reinstalled Vray and found, that the spawner ini was reset to the old ports at the slave. Since I like to to use VfR1 and VfR2 I need an own parallel port setup. This setup was reset. Now, after I set the right port at the slave spawner ini again it works. 🙂

---

<div class="post-metadata">

**Author:** ![renee81](https://avatars.discourse-cdn.com/v4/letter/r/ce73a5/32.png) [@renee81](https://forums.chaos.com/u/renee81)\
**Post date:** [February 13, 2014, 1:22pm UTC](https://forums.chaos.com/t/how-to-setup-the-firewall-for-dr/48561/9 "2014-02-13T13:22:00Z")

</div>

Happy that your problem is solve !
