# Inconsistent / Unusable Alpha w/ Matte Objects

**URL:** <https://forums.chaos.com/t/inconsistent-unusable-alpha-w-matte-objects/10456>\
**Category:** Issues\
**Created:** [March 23, 2006, 5:54pm UTC](https://forums.chaos.com/t/inconsistent-unusable-alpha-w-matte-objects/10456 "2006-03-23T17:54:09Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![ShaunDon](https://avatars.discourse-cdn.com/v4/letter/s/e19b73/32.png) [@ShaunDon](https://forums.chaos.com/u/ShaunDon)\
**Post date:** [March 23, 2006, 5:54pm UTC](https://forums.chaos.com/t/inconsistent-unusable-alpha-w-matte-objects/10456/1 "2006-03-23T17:54:09Z")

</div>

Can someone tell me why V-Ray still does this to me? Here’s a pass of an exterior canopy I’m rendering for an animation, however some of the building geometry runs through the ground -- it’s uneven terrain, there’s simply no better way to do it in production. So when I want these columns rendered on their own pass and terminating at the ground level, I select all my ground layer objects and in their V-Ray properties check off Matte Object and set the alpha to -1.0.

V-Ray has NEVER done this correctly for as long as I’ve been using it, and I know I’ve posted on it before. As you can see, for some ungodly reason my curbs -- even though it says in their properties when I check again that they are set to matte with no alpha -- still render in the alpha channel. Anybody know how to fix this?

Thanks guys,  
Shaun

---

<div class="post-metadata">

**Author:** ![voltron7](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/voltron7/32/39008_2.png) [@voltron7](https://forums.chaos.com/u/voltron7)\
**Post date:** [March 23, 2006, 6:44pm UTC](https://forums.chaos.com/t/inconsistent-unusable-alpha-w-matte-objects/10456/2 "2006-03-23T18:44:02Z")

</div>

This usually applies to glass, so it’s Just a long shot Shaun, but does the material for the curbs have affect alpha checked? Sorry if this is not helping, I’ve not experienced this (or tested for) this problem…

JR

---

<div class="post-metadata">

**Author:** ![Kr0no](https://avatars.discourse-cdn.com/v4/letter/k/5e9695/32.png) [@Kr0no](https://forums.chaos.com/u/Kr0no)\
**Post date:** [March 24, 2006, 2:57pm UTC](https://forums.chaos.com/t/inconsistent-unusable-alpha-w-matte-objects/10456/3 "2006-03-24T14:57:32Z")

</div>

Just put affect alpha to 0…😉

---

<div class="post-metadata">

**Author:** ![ShaunDon](https://avatars.discourse-cdn.com/v4/letter/s/e19b73/32.png) [@ShaunDon](https://forums.chaos.com/u/ShaunDon)\
**Post date:** [March 24, 2006, 4:19pm UTC](https://forums.chaos.com/t/inconsistent-unusable-alpha-w-matte-objects/10456/4 "2006-03-24T16:19:54Z")

</div>

Thanks guys -- guess the email notification isn’t working, I didn’t realize anyone had responded. I’ll try the alpha set to 0 rather than -1… I just don’t get why that works fine for the pavement, grass, paint lines, etc., but not the curbs. It’s suspect…

Shaun

---

<div class="post-metadata">

**Author:** ![vlado](https://avatars.discourse-cdn.com/v4/letter/v/779978/32.png) [@vlado](https://forums.chaos.com/u/vlado)\
**Post date:** [March 24, 2006, 7:43pm UTC](https://forums.chaos.com/t/inconsistent-unusable-alpha-w-matte-objects/10456/5 "2006-03-24T19:43:55Z")

</div>

Also make sure there aren’t any double faces.

Best regards,  
Vlado
