Living Room C&C and help needed

V-Ray V-Ray Common Gallery
1

Hi

I don’t fully understand the problems in the two highlighted regions.
Region 1 I find the most difficult to understand why it has rendered with such bad samples if one compares it to the rest of the image.
Region two I thing the problem lie with in the way I have setup the lights in the kitchen area. I have attached an image of what the lights in the kitchen looks like. This I have modeled and placed a VRay light between the two pieces of glass. Its not touch the glass, but still very bad samples in this area.
Where am I going wrong?
Any other C&C on this image/design is most welcome.

Thanks

2

I would try much more samples and making sure all materials are vray. If that doesn’t work, then add a little dim direct light from the camera direction

3

Hi

Which samples would you increase?

My LC is set at 1300 and IR at medium with HSph at 50 and Interp. samples at 20.
For DMC sampler I have Noise threshold at .005 and Min samples at 12

Thanks

4

looks to me like definitely an indirect illumination issue. can you post up your full irradiance map and light cache settings???