# Reasonable Render Settings

**URL:** <https://forums.chaos.com/t/reasonable-render-settings/111810>\
**Category:** General\
**Created:** [August 31, 2022, 9:52pm UTC](https://forums.chaos.com/t/reasonable-render-settings/111810 "2022-08-31T21:52:46Z")\
**Posts on this page:** 18\
**Page:** 1

<div class="post-metadata">

**Author:** ![Streetwise](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/streetwise/32/57956_2.png) [@Streetwise](https://forums.chaos.com/u/Streetwise)\
**Post date:** [August 31, 2022, 9:52pm UTC](https://forums.chaos.com/t/reasonable-render-settings/111810/1 "2022-08-31T21:52:46Z")

</div>

With GPU rendering, what is a good, reasonable setting to use for Samples limit and noise? I know that it “all depends” on the scene, lighting, output desired, etc…  
With V-Ray 5, a friend of mine told me to “set the Sample limit up to 50,000” and the Noise limit to .003. That actually worked pretty well, but with V-Ray 6, it seems like it’s taking forever…

Back in the CPU days, I used to use a Noise limit of .01 for almost everything… What setting have you found work well for interiors with a dome-light?

Thanks

 ![Screenshot 2022-08-31 174752.jpg](https://europe1.discourse-cdn.com/chaosprd/original/3X/1/d/1d4c7f2f243d2b6e1883fb2d48af14ba76cba2d7.jpeg)

---

<div class="post-metadata">

**Author:** ![hermit.crab](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/hermit.crab/32/46825_2.png) [@hermit.crab](https://forums.chaos.com/u/hermit.crab)\
**Post date:** [September 1, 2022, 7:06am UTC](https://forums.chaos.com/t/reasonable-render-settings/111810/2 "2022-09-01T07:06:36Z")

</div>

That’s what the default settings are meant to be. Start from there and adjust accordingly.

---

<div class="post-metadata">

**Author:** ![\_Lele](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/_lele/32/49986_2.png) [@\_Lele](https://forums.chaos.com/u/_Lele)\
**Post date:** [September 8, 2022, 1:44pm UTC](https://forums.chaos.com/t/reasonable-render-settings/111810/3 "2022-09-08T13:44:58Z")

</div>

CPU or GPU makes no difference here.  
To know what it is you are doing, you will need to add a sampleRate RE to your renders.  
Optionally, a noiseLevel RE may provide for more info.  
The sampleRate RE is the thing that will let you know if you are hitting the end of the sampling V-Ray is allowed to bring to bear (i.e. max AA/samples), thereby leaving areas below the noise threshold you set (and those ought to be visible/detectable in the noiselevel RE), or if the noise threhsold is being achieved without using up all the sampling allowed.

In essence, nothing has changed from [this](https://forums.chaos.com/forum/v-ray-for-3ds-max-forums/v-ray-for-3ds-max-general/67528-cheatsheet-how-to-get-a-cleaner-image-with-sp3).

Within a given max samples limit, simply moving up and down noise threshold will globally speed up/clean up the rendering, unless ofc you’re asking V-Ray to achieve too low a noise level, with too few max samples.

---

<div class="post-metadata">

**Author:** ![Muhammed\_Hamed](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/muhammed_hamed/32/73779_2.png) [@Muhammed\_Hamed](https://forums.chaos.com/u/Muhammed_Hamed)\
**Post date:** [September 9, 2022, 10:04am UTC](https://forums.chaos.com/t/reasonable-render-settings/111810/4 "2022-09-09T10:04:13Z")

</div>

Hello @Streetwise

In addition to what my colleagues suggested, we have changed the default sampling settings in V-Ray 6 GPU. The new defaults should work well with most scenes, it uses 2500 Samples Limit and .01 noise threshold  
There is no need to set samples limit to 50,000 , if you want cleaner results first try using a lower noise threshold like 0.005 (and samples limit of 2500) then you can double samples limit to 5000 if you have noise in GI/Refractions/Reflections..etc  
We recommend using Progressive sampler type for V-Ray GPU, it is better than Bucket mode in performance and memory usage. And remove any render elements that you don’t need, this will speed up your rendering as well  
If it is still slow on your side, upload me a screenshot of your beauty element + Sample Rate. I can take a look at your scene as well, if possible

Best,  
Muhammed

---

<div class="post-metadata">

**Author:** ![Streetwise](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/streetwise/32/57956_2.png) [@Streetwise](https://forums.chaos.com/u/Streetwise)\
**Post date:** [September 9, 2022, 12:22pm UTC](https://forums.chaos.com/t/reasonable-render-settings/111810/5 "2022-09-09T12:22:02Z")

</div>

> [@Muhammed\_Hamed](#):
>
> Hello @Streetwise  
> We recommend using Progressive sampler type for V-Ray GPU, it is better than Bucket mode in performance and memory usage.

Is Progressive preferred for animated sequences as well?

---

<div class="post-metadata">

**Author:** ![Streetwise](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/streetwise/32/57956_2.png) [@Streetwise](https://forums.chaos.com/u/Streetwise)\
**Post date:** [September 9, 2022, 1:44pm UTC](https://forums.chaos.com/t/reasonable-render-settings/111810/6 "2022-09-09T13:44:05Z")

</div>

Also… Does Cryptomatte work with Progressive in V-Ray 6?

---

<div class="post-metadata">

**Author:** ![Muhammed\_Hamed](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/muhammed_hamed/32/73779_2.png) [@Muhammed\_Hamed](https://forums.chaos.com/u/Muhammed_Hamed)\
**Post date:** [September 12, 2022, 5:20pm UTC](https://forums.chaos.com/t/reasonable-render-settings/111810/7 "2022-09-12T17:20:18Z")

</div>

Hello,

The answer is yes to both questions  
For animation sequences you will be able to use a time limit per frame. This is common practice in rendering animations  
On my 3090 I set it to like 1-2 minutes depending on the scene and resolution

Best,  
Muhammed

---

<div class="post-metadata">

**Author:** ![Streetwise](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/streetwise/32/57956_2.png) [@Streetwise](https://forums.chaos.com/u/Streetwise)\
**Post date:** [September 12, 2022, 6:15pm UTC](https://forums.chaos.com/t/reasonable-render-settings/111810/8 "2022-09-12T18:15:38Z")

</div>

> [@Muhammed\_Hamed](#):
>
> On my 3090 I set it to like 1-2 minutes depending on the scene and resolution

I would assume that you must use Denoiser then for the animations? Have you noticed any flicker or inconsistencies if you apply a hard “stop” of say, 2 minutes to each frame?

Currently, I am trying a Time limit of 6.0 minutes, .01 noise and 2500 Samples limit, but the renders still take 7.5+/- minutes to complete. Not sure why the 6 min stop is being ignored.

---

<div class="post-metadata">

**Author:** ![\_Lele](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/_lele/32/49986_2.png) [@\_Lele](https://forums.chaos.com/u/_Lele)\
**Post date:** [September 13, 2022, 9:59pm UTC](https://forums.chaos.com/t/reasonable-render-settings/111810/9 "2022-09-13T21:59:10Z")

</div>

> [@Streetwise](#):
>
> Not sure why the 6 min stop is being ignored.

In general, the sampler will stop trying to lower noise until the time limit is reached.  
However, if it stopped suddenly, noise level across the frame wouldn’t be uniform, so V-Ray (CPU too.) will exceed the time limit to bring all the remaining pixels under the N.T. defined at the stoppage time.  
Add a sampleRate RE and stare at it while rendering is going: you’ll get a clearer idea of what V-Ray is doing, and why the time limit isn’t respected exactly.

edit: notice that setting a time limit for an animation is dangerous, as each frame noise level will be different (denoising will also, as a consequence, produce subtly different results.).  
How different is of course dependent on what is being rendered (f.e. all of a sudden a divergent task comes into play, like SSS, and your performance tanks compared to the previous frames.), but conceptually, that’s what is going to happen: don’t use it for finals, unless you are 100% sure you know what you’re doing, and are fine with the varying noise amount per frame.

---

<div class="post-metadata">

**Author:** ![skafimsk](https://avatars.discourse-cdn.com/v4/letter/s/5daacb/32.png) [@skafimsk](https://forums.chaos.com/u/skafimsk)\
**Post date:** [September 16, 2022, 6:23am UTC](https://forums.chaos.com/t/reasonable-render-settings/111810/10 "2022-09-16T06:23:19Z")

</div>

> [@Muhammed\_Hamed](#):
>
> Hello @Streetwise
> 
> In addition to what my colleagues suggested, we have changed the default sampling settings in V-Ray 6 GPU. The new defaults should work well with most scenes, it uses 2500 Samples Limit and .01 noise threshold  
> There is no need to set samples limit to 50,000 , if you want cleaner results first try using a lower noise threshold like 0.005 (and samples limit of 2500) then you can double samples limit to 5000 if you have noise in GI/Refractions/Reflections..etc  
> We recommend using Progressive sampler type for V-Ray GPU, it is better than Bucket mode in performance and memory usage. And remove any render elements that you don’t need, this will speed up your rendering as well  
> If it is still slow on your side, upload me a screenshot of your beauty element + Sample Rate. I can take a look at your scene as well, if possible
> 
> Best,  
> Muhammed

I always thought that bucket was better for memory usage, since it divides the scene into buckets instead of having to throw samples at the scene at once.  
What is the status for optimizing vray gpu with many instances/heavy forest pack scenes ? You once said it is in active development or being looked at by the vray gpu team

---

<div class="post-metadata">

**Author:** ![Muhammed\_Hamed](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/muhammed_hamed/32/73779_2.png) [@Muhammed\_Hamed](https://forums.chaos.com/u/Muhammed_Hamed)\
**Post date:** [September 23, 2022, 5:09pm UTC](https://forums.chaos.com/t/reasonable-render-settings/111810/11 "2022-09-23T17:09:41Z")

</div>

> [@skafimsk](#):
>
> I always thought that bucket was better for memory usage, since it divides the scene into buckets instead of having to throw samples at the scene at once.  
> What is the status for optimizing vray gpu with many instances/heavy forest pack scenes ? You once said it is in active development or being looked at by the vray gpu team

Hey @skafimsk

Progressive is faster than bucket mode in the current builds of V-Ray GPU (up to 2x faster), and better on memory usage. swapping to progressive will save you at least 3 GB of GPU memory, it is part of our planning now to polish bucket mode and make it faster.

About Forest Pack and V-Ray GPU, this affects time to first pixel. It is near the top of our current priorities on the GPU roadmap. I hope to share some news on this soon

Best,  
Muhammed

---

<div class="post-metadata">

**Author:** ![Muhammed\_Hamed](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/muhammed_hamed/32/73779_2.png) [@Muhammed\_Hamed](https://forums.chaos.com/u/Muhammed_Hamed)\
**Post date:** [September 23, 2022, 5:15pm UTC](https://forums.chaos.com/t/reasonable-render-settings/111810/12 "2022-09-23T17:15:19Z")

</div>

> [@Streetwise](#):
>
> I would assume that you must use Denoiser then for the animations? Have you noticed any flicker or inconsistencies if you apply a hard “stop” of say, 2 minutes to each frame?
> 
> Currently, I am trying a Time limit of 6.0 minutes, .01 noise and 2500 Samples limit, but the renders still take 7.5+/- minutes to complete. Not sure why the 6 min stop is being ignored.

Hello!

It depends on the scene of course, is there a chance I can take a look at your setup ?  
I use 3090s as well, so on high end GPUs targeting one or 2 minutes per frame has always been simple for what I did in print. And yeah, I use V-Ray’s denoiser  
What resolution are you rendering at? 7 minutes per frame on 2x 3090s seems slow

Best,  
Muhammed

---

<div class="post-metadata">

**Author:** ![piotrus3333](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/piotrus3333/32/17521_2.png) [@piotrus3333](https://forums.chaos.com/u/piotrus3333)\
**Post date:** [September 26, 2022, 12:31pm UTC](https://forums.chaos.com/t/reasonable-render-settings/111810/13 "2022-09-26T12:31:38Z")

</div>

ok: what I find confusing is why _GPU Samples limit_ value now (since the default become 2500) means “max samples per pixel \*4”. what’s with the \*4? previously _Samples limit_ of 5000 corresponded to 71 max subdivisions (samples are subdivs squared) but now 5000 gives 35 max subdivs (when changed to cpu engine). what am I missing here?

---

<div class="post-metadata">

**Author:** ![Muhammed\_Hamed](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/muhammed_hamed/32/73779_2.png) [@Muhammed\_Hamed](https://forums.chaos.com/u/Muhammed_Hamed)\
**Post date:** [September 29, 2022, 5:06pm UTC](https://forums.chaos.com/t/reasonable-render-settings/111810/14 "2022-09-29T17:06:31Z")

</div>

> [@piotrus3333](#):
>
> ok: what I find confusing is why _GPU Samples limit_ value now (since the default become 2500) means “max samples per pixel \*4”

Hey Marcin,

Samples Limit is Max Subdivs, default value now is 2500 which is 48 Max Subdivs  
Max Samples per pixel, is rays per pixel in the performance tab. it translates to min subdivs internally which is default at 8, you will not need to change that (it is not linked to the standard CPU renderer)  
The GPU UI does all the conversions between V-Ray and V-Ray GPU, I can give you the conversion formulas, I don’t think it is necessary  
The goal is having one slider to control sampling/quality in V-Ray GPU which is Sample Limit, everything else stays at defaults

Best,  
Muhammed

---

<div class="post-metadata">

**Author:** ![piotrus3333](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/piotrus3333/32/17521_2.png) [@piotrus3333](https://forums.chaos.com/u/piotrus3333)\
**Post date:** [October 20, 2022, 1:27pm UTC](https://forums.chaos.com/t/reasonable-render-settings/111810/15 "2022-10-20T13:27:59Z")

</div>

> [@Muhammed\_Hamed](#):
>
> Hey Marcin,
> 
> Samples Limit is Max Subdivs, default value now is 2500 which is 48 Max Subdivs  
> Max Samples per pixel, is rays per pixel in the performance tab. it translates to min subdivs internally which is default at 8, you will not need to change that (it is not linked to the standard CPU renderer)  
> The GPU UI does all the conversions between V-Ray and V-Ray GPU, I can give you the conversion formulas, I don’t think it is necessary  
> The goal is having one slider to control sampling/quality in V-Ray GPU which is Sample Limit, everything else stays at defaults
> 
> Best,  
> Muhammed

GPU Samples Limit 2500 seems to be 25 subdivisions when you change the engine to cpu: sqr(2500/4). if just the default value of max samples per pixel (described in subdivisions) changed it would be Samples Limit of 576 not 2500. The default value and what the number means changed at the same time - question is why?

---

<div class="post-metadata">

**Author:** ![GregCooper](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/gregcooper/32/7956_2.png) [@GregCooper](https://forums.chaos.com/u/GregCooper)\
**Post date:** [October 26, 2022, 6:51am UTC](https://forums.chaos.com/t/reasonable-render-settings/111810/16 "2022-10-26T06:51:12Z")

</div>

Just updated to Vray 6, are these changes to the GPU render settings reflected in the docs? I can’t find them if so.  
Bit confused about Samples Limit and Rays per Pixel, I’m assuming samples limit has just replaced ‘Max Samples’ in Vray 5 but the numbers have shifted. For GPU I used to set it to max samples of 100 and just control quality with the noise threshold.  
@Muhammed_Hamed I see you’ve mentioned 2500 should be around the same as 48 max samples? is this still high enough for most GPU renders as that used to get me noise with glass materials.

And would this ‘samples limit’ now be comparable to number of samples in Octane render? I was always a bit confused about the difference in terminology between Vray GPU and Octane

---

<div class="post-metadata">

**Author:** ![Muhammed\_Hamed](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/muhammed_hamed/32/73779_2.png) [@Muhammed\_Hamed](https://forums.chaos.com/u/Muhammed_Hamed)\
**Post date:** [November 10, 2022, 10:39am UTC](https://forums.chaos.com/t/reasonable-render-settings/111810/17 "2022-11-10T10:39:50Z")

</div>

> [@piotrus3333](#):
>
> GPU Samples Limit 2500 seems to be 25 subdivisions when you change the engine to cpu: sqr(2500/4). if just the default value of max samples per pixel (described in subdivisions) changed it would be Samples Limit of 576 not 2500. The default value and what the number means changed at the same time - question is why?

V-Ray GPU will use double the Max Subdivs of what the standard V-Ray uses, in our testing this produces very close noise results  
So 24 Max Subdivs on CPU, translates to 48 Max Subdivs on GPU which is 2500 Samples Limit

Best,  
Muhammed

---

<div class="post-metadata">

**Author:** ![Muhammed\_Hamed](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/muhammed_hamed/32/73779_2.png) [@Muhammed\_Hamed](https://forums.chaos.com/u/Muhammed_Hamed)\
**Post date:** [November 10, 2022, 10:44am UTC](https://forums.chaos.com/t/reasonable-render-settings/111810/18 "2022-11-10T10:44:22Z")

</div>

> [@GregCooper](#):
>
> @Muhammed_Hamed I see you’ve mentioned 2500 should be around the same as 48 max samples? is this still high enough for most GPU renders as that used to get me noise with glass materials.
> 
> And would this ‘samples limit’ now be comparable to number of samples in Octane render? I was always a bit confused about the difference in terminology between Vray GPU and Octane

Yes to both questions  
2500 Samples Limit is 48 Max Subdivs in V-Ray 5 for Maya. It should work well for most cases  
You can go to 5000 Samples which is around 70 Max Subdivs if you need cleaner results

The goal of this change in the GPU UI is ease of use, in most cases you will use noise threshold to control quality/noise and leave samples limit to 2500 or 5000  
On another note, if you have a scene setup for the standard V-Ray (CPU) your sampling settings will get translated automatically to V-Ray GPU. This helps people testing GPU rendering on their existing scenes, the noise results will be close between V-Ray and V-Ray GPU

Best,  
Muhammed
