# Revit View VS Enscape view

**URL:** <https://forums.chaos.com/t/revit-view-vs-enscape-view/163110>\
**Category:** General\
**Tags:** enscape-revit\
**Created:** [June 28, 2017, 3:30pm UTC](https://forums.chaos.com/t/revit-view-vs-enscape-view/163110 "2017-06-28T15:30:28Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![grafista](https://avatars.discourse-cdn.com/v4/letter/g/8491ac/32.png) [@grafista](https://forums.chaos.com/u/grafista)\
**Post date:** [June 28, 2017, 3:30pm UTC](https://forums.chaos.com/t/revit-view-vs-enscape-view/163110/1 "2017-06-28T15:30:28Z")

</div>

How to make Revit view **tally exactly** with Enscape view setting? I hope it tallies exactly when it comes to the following considerations:

- Window view size

- view setting

- sun setting

- Field of View

- Two-point perspective / or non-point perspective

 ![pasted-from-clipboard.jpg](https://europe1.discourse-cdn.com/chaosprd/original/3X/7/b/7b611bca091b6bedb648e94e8bdb73816155d6fc.jpeg)

 ![pasted-from-clipboard.jpg](https://europe1.discourse-cdn.com/chaosprd/original/3X/7/b/7b611bca091b6bedb648e94e8bdb73816155d6fc.jpeg)

---

<div class="post-metadata">

**Author:** ![Thomas\_Willberger](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/thomas_willberger/32/189045_2.png) [@Thomas\_Willberger](https://forums.chaos.com/u/Thomas_Willberger)\
**Post date:** [June 28, 2017, 9:22pm UTC](https://forums.chaos.com/t/revit-view-vs-enscape-view/163110/2 "2017-06-28T21:22:22Z")

</div>

Chose the Revit view, adjust the aspect ratio of your window and set the field of view. Then it shouls match 100%.

The sun position is automatically transferred from Revit to Enscape.

Do not use Two Point here. Two Point is a distortion of the image to force vertical lines being vertical in the image. It might be useful for certain rendering perspectives but in general it should not be used.

---

<div class="post-metadata">

**Author:** ![kristw](https://avatars.discourse-cdn.com/v4/letter/k/d78d45/32.png) [@kristw](https://forums.chaos.com/u/kristw)\
**Post date:** [August 3, 2017, 8:20pm UTC](https://forums.chaos.com/t/revit-view-vs-enscape-view/163110/3 "2017-08-03T20:20:55Z")

</div>

There’s no way to handle a 2 point view out of Revit? This would be great along with the ability to save the view in Enscape.