# Struggling with UVW Unwrap

**URL:** <https://forums.chaos.com/t/struggling-with-uvw-unwrap/61097>\
**Category:** General\
**Created:** [November 24, 2016, 2:19pm UTC](https://forums.chaos.com/t/struggling-with-uvw-unwrap/61097 "2016-11-24T14:19:32Z")\
**Posts on this page:** 12\
**Page:** 1

<div class="post-metadata">

**Author:** ![PGD](https://avatars.discourse-cdn.com/v4/letter/p/9d8465/32.png) [@PGD](https://forums.chaos.com/u/PGD)\
**Post date:** [November 24, 2016, 2:19pm UTC](https://forums.chaos.com/t/struggling-with-uvw-unwrap/61097/1 "2016-11-24T14:19:32Z")

</div>

Hi folks,

How can I get my texture to align with the geometry properly?

Here’s what I have:

[![](https://europe1.discourse-cdn.com/chaosprd/original/4X/3/b/1/3b1920d90433b5e5976dd268f900f28680917d6f.jpeg)](https://flic.kr/p/PkAqyy)[UVW unwrap](https://flic.kr/p/PkAqyy) by [Phil Grayston](https://www.flickr.com/photos/pgdesignscouk/), on Flickr

On the left is the texture in the UV editor, fitting on the mesh fine. On the right is the texture in the viewport, not fitting at all?

I’m trying to map this Mesh cladding texture better than the current UVW Map set to Face - which is not working very well.

[![](https://europe1.discourse-cdn.com/chaosprd/original/4X/1/1/9/1198fd89e728860caac367497f2f39437383953b.jpeg)](https://flic.kr/p/NZPTPN)[Huddersfield Uni-B-02-02](https://flic.kr/p/NZPTPN) by [Phil Grayston](https://www.flickr.com/photos/pgdesignscouk/), on Flickr

I’ve never been able to get the hang of UV Unwrapping ☹

Any suggestions?

---

<div class="post-metadata">

**Author:** ![NicoC](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/nicoc/32/23122_2.png) [@NicoC](https://forums.chaos.com/u/NicoC)\
**Post date:** [November 24, 2016, 2:21pm UTC](https://forums.chaos.com/t/struggling-with-uvw-unwrap/61097/2 "2016-11-24T14:21:32Z")

</div>

UVW Map Clear modifier before UVW Unwrap ?

---

<div class="post-metadata">

**Author:** ![PGD](https://avatars.discourse-cdn.com/v4/letter/p/9d8465/32.png) [@PGD](https://forums.chaos.com/u/PGD)\
**Post date:** [November 24, 2016, 2:33pm UTC](https://forums.chaos.com/t/struggling-with-uvw-unwrap/61097/3 "2016-11-24T14:33:31Z")

</div>

> [@NicoC](#):
>
> UVW Map Clear modifier before UVW Unwrap ?

No change with that..

It’ll be something ludicrously simple to solve I’m sure, but only when you know how!

---

<div class="post-metadata">

**Author:** ![rivoli](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/rivoli/32/44395_2.png) [@rivoli](https://forums.chaos.com/u/rivoli)\
**Post date:** [November 24, 2016, 3:23pm UTC](https://forums.chaos.com/t/struggling-with-uvw-unwrap/61097/4 "2016-11-24T15:23:51Z")

</div>

that’s weird, have you checked that map channels correspond?

---

<div class="post-metadata">

**Author:** ![PGD](https://avatars.discourse-cdn.com/v4/letter/p/9d8465/32.png) [@PGD](https://forums.chaos.com/u/PGD)\
**Post date:** [November 24, 2016, 3:28pm UTC](https://forums.chaos.com/t/struggling-with-uvw-unwrap/61097/5 "2016-11-24T15:28:05Z")

</div>

I made a new material, added the bitmap texture and applied it. So all the map channels are set to 1 as far as I can see.

Maybe I should UVW Reset and go through the whole process again?

---

<div class="post-metadata">

**Author:** ![PGD](https://avatars.discourse-cdn.com/v4/letter/p/9d8465/32.png) [@PGD](https://forums.chaos.com/u/PGD)\
**Post date:** [November 24, 2016, 3:57pm UTC](https://forums.chaos.com/t/struggling-with-uvw-unwrap/61097/6 "2016-11-24T15:57:20Z")

</div>

I’ve tried re-setting the UVW and seen no change.

I can adjust it manually until the map fits, but that can’t be right surely?

I’m sure I’m doing something wrong durning this process, but as yet I dont know what. Anyone want to have a go with the attached files?  
[skin-section-01.zip](https://forums.chaos.com/uploads/short-url/7xN26Z7pp3ohovJ4V23pjkPLC6n.zip) (645 KB)

---

<div class="post-metadata">

**Author:** ![rfellers](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/rfellers/32/163_2.png) [@rfellers](https://forums.chaos.com/u/rfellers)\
**Post date:** [November 24, 2016, 4:24pm UTC](https://forums.chaos.com/t/struggling-with-uvw-unwrap/61097/7 "2016-11-24T16:24:12Z")

</div>

Works fine here… When I opened the file, the mapping coordinates were wrong though. I added an ‘unwrap uvw’, then opened the uv editor and selected mapping - flat mapping. That correctly set the UV coordinates. You can then collapse the stack. If you just delete the unwrap uvw from the stack it will delete the new uv coordinates that you just created (flat mapping).

Ryan

 ![Skin.jpg](https://europe1.discourse-cdn.com/chaosprd/original/3X/5/9/5961d43f515965c849cdd01e37e4e5ba0fb4653b.jpeg)

---

<div class="post-metadata">

**Author:** ![PGD](https://avatars.discourse-cdn.com/v4/letter/p/9d8465/32.png) [@PGD](https://forums.chaos.com/u/PGD)\
**Post date:** [November 24, 2016, 5:08pm UTC](https://forums.chaos.com/t/struggling-with-uvw-unwrap/61097/8 "2016-11-24T17:08:55Z")

</div>

That’s it!

Thanks for your help everyone.

---

<div class="post-metadata">

**Author:** ![Anthonyyg](https://avatars.discourse-cdn.com/v4/letter/a/71c47a/32.png) [@Anthonyyg](https://forums.chaos.com/u/Anthonyyg)\
**Post date:** [November 29, 2016, 10:47pm UTC](https://forums.chaos.com/t/struggling-with-uvw-unwrap/61097/9 "2016-11-29T22:47:28Z")

</div>

Hi PGD

The best way to approach this with the minimal of tweaking is to apply the Unwrap UVW modifier.  
Select only the polygons that you wish to map  
Change projection to Planer Map  
Use best align  
Open up the UVW Editor

Now you have a separate detached selection of flattened polygons for just that area  
Using the rotate and scale tools to fit your map as best you can.

If you do need to adjust further use soft selection to spread the distortion  
You can check your this by using display \> display edge distortion  
Green is less distorted Red is more distorted.

This is the best unwrap I could achieve took a few minutes.

> **[WeTransfer | Send Large Files Fast](https://wetransfer.com/downloads/47399c5717760da811d62dd5e642e6b420161129224509/b13288)**
>
> The simple, quick and secure way to send your files around the world without an account. Share your files, photos, and videos today for free.

---

<div class="post-metadata">

**Author:** ![PGD](https://avatars.discourse-cdn.com/v4/letter/p/9d8465/32.png) [@PGD](https://forums.chaos.com/u/PGD)\
**Post date:** [December 2, 2016, 9:28am UTC](https://forums.chaos.com/t/struggling-with-uvw-unwrap/61097/10 "2016-12-02T09:28:10Z")

</div>

Thanks Ant,

I’m ok with this now and think it’s looking better.

[![](https://europe1.discourse-cdn.com/chaosprd/original/4X/b/b/2/bb2c703ff02cdc7a3c8332ea1c07e74760b5734b.jpeg)](https://flic.kr/p/PJNMrN)[  
UVW mapping](https://flic.kr/p/PJNMrN) by [Phil Grayston](https://www.flickr.com/photos/pgdesignscouk/), on Flickr

Viewed up close the holes are a little blurred, as you can see here in the upper panels (if you ignore the mesh for a moment) I’ve got the UVW map revealing a mesh map underneith, the mesh map then tiles a lot so that texture still looks sharp.

The map res of the side elevation is 4096 x 3612 - I guess I could up that? I did wonder about creating a Vector based texture to try that too.

Close up:  
[![](https://europe1.discourse-cdn.com/chaosprd/original/4X/4/1/4/41493d3299c41223497bf0726559a0df7735cbed.jpeg)](https://flic.kr/p/PJNxbd)[  
UVW mapping](https://flic.kr/p/PJNxbd) by [Phil Grayston](https://www.flickr.com/photos/pgdesignscouk/), on Flickr

Hope that makes sence!

---

<div class="post-metadata">

**Author:** ![NicoC](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/nicoc/32/23122_2.png) [@NicoC](https://forums.chaos.com/u/NicoC)\
**Post date:** [December 2, 2016, 10:49am UTC](https://forums.chaos.com/t/struggling-with-uvw-unwrap/61097/11 "2016-12-02T10:49:30Z")

</div>

Nice job !

---

<div class="post-metadata">

**Author:** ![Pixelab](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/pixelab/32/13814_2.png) [@Pixelab](https://forums.chaos.com/u/Pixelab)\
**Post date:** [December 5, 2016, 4:58pm UTC](https://forums.chaos.com/t/struggling-with-uvw-unwrap/61097/12 "2016-12-05T16:58:25Z")

</div>

Project looks nice btw 🙂
