# 4090 **URL:** \ **Category:** General\ **Created:** [October 11, 2022, 3:08pm UTC](https://forums.chaos.com/t/topic/112319 "2022-10-11T15:08:40Z")\ **Posts on this page:** 14\ **Page:** 1
**Author:** ![oglu](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/oglu/32/41090_2.png) [@oglu](https://forums.chaos.com/u/oglu)\ **Post date:** [October 11, 2022, 3:08pm UTC](https://forums.chaos.com/t/topic/112319/1 "2022-10-11T15:08:40Z")
Any hands on? Benchmarks? > **[NVIDIA GeForce RTX 4090 24 GB “Ada” Founders Edition Review – BFGPU Perfected](https://wccftech.com/review/nvidia-geforce-rtx-4090-24-gb-ada-founders-edition-review-bfgpu-perfected/15/)** > > A new dawn is finally upon us! Enter Ada Lovelace, NVIDIA's next-gen GPU powerhouse powering their flagship GeForce RTX 4090 graphics card. ---
**Author:** ![oglu](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/oglu/32/41090_2.png) [@oglu](https://forums.chaos.com/u/oglu)\ **Post date:** [October 11, 2022, 5:48pm UTC](https://forums.chaos.com/t/topic/112319/2 "2022-10-11T17:48:27Z")
An other one. > **[NVIDIA GeForce RTX 4090: The New Rendering Champion](https://techgage.com/article/nvidia-geforce-rtx-4090-the-new-rendering-champion/)** > > NVIDIA has just kicked-off its Ada Lovelace generation with a new flagship GPU: GeForce RTX 4090. Our first performance look will revolve around rendering, and once you see the results, you'll understand why. Whereas Ampere itself brought huge... ---
**Author:** ![yeoldewolfe](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/yeoldewolfe/32/24965_2.png) [@yeoldewolfe](https://forums.chaos.com/u/yeoldewolfe)\ **Post date:** [October 12, 2022, 12:58pm UTC](https://forums.chaos.com/t/topic/112319/3 "2022-10-12T12:58:00Z")
Looking for the official Vray analysis. Too bad there’s no NVlink. ---
**Author:** ![oglu](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/oglu/32/41090_2.png) [@oglu](https://forums.chaos.com/u/oglu)\ **Post date:** [October 13, 2022, 1:16am UTC](https://forums.chaos.com/t/topic/112319/4 "2022-10-13T01:16:47Z")
Looks like this card is a beast. > **[GPU Rendering: V-Ray - NVIDIA GeForce RTX 4090 24GB Content Creation Review](https://www.pugetsystems.com/labs/articles/NVIDIA-GeForce-RTX-4090-24GB-Content-Creation-Review-2374/#GPURenderingV-Ray)** > > Table of Contents | NVIDIA is beginning to launch their new RTX 40 Series GPUs, starting with the GeForce RTX 4090. NVIDIA touting significantly higher performance versus the previous generation 30 series, but how does this new card perform in the... ---
**Author:** ![Muhammed\_Hamed](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/muhammed_hamed/32/73779_2.png) [@Muhammed\_Hamed](https://forums.chaos.com/u/Muhammed_Hamed)\ **Post date:** [October 13, 2022, 10:10am UTC](https://forums.chaos.com/t/topic/112319/5 "2022-10-13T10:10:18Z")
Hello everyone, I shared our Benchmark numbers for V-Ray GPU in this [thread](https://forums.chaos.com/forum/v-ray-rt-forums/v-ray-rt-general/1162203-rtx-4090-performance-thermals-and-power-consumption), as well as notes on the thermals, power consumption for anyone who plan on buying the new GPUs In Benchmark 5, The RTX Benchmark we see **125%** faster renders with the RTX 4090 compared to the RTX 3090, and **116%** faster renders in the Cuda Benchmark Best, Muhammed ---
**Author:** ![Markus](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/markus/32/60371_2.png) [@Markus](https://forums.chaos.com/u/Markus)\ **Post date:** [October 14, 2022, 10:53am UTC](https://forums.chaos.com/t/topic/112319/6 "2022-10-14T10:53:16Z")
I found this statement: "Nvidia CEO Jensen Huang confirmed that the company is doing away with its NVLink bridge. Replacing NVLink is PCIe Gen 5, which Huang and Nvidia claimed will be sufficiently fast to connect multiple GPUs together, " What does this mean? Will it be possible that we have a replacement for the NVlink feature over the PCIe bus? ---
**Author:** ![haniel1107](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/haniel1107/32/37099_2.png) [@haniel1107](https://forums.chaos.com/u/haniel1107)\ **Post date:** [October 27, 2022, 1:52am UTC](https://forums.chaos.com/t/topic/112319/7 "2022-10-27T01:52:12Z")
> [@Muhammed\_Hamed](#): > > Hello everyone, > > I shared our Benchmark numbers for V-Ray GPU in this [thread](https://forums.chaos.com/forum/v-ray-rt-forums/v-ray-rt-general/1162203-rtx-4090-performance-thermals-and-power-consumption), as well as notes on the thermals, power consumption for anyone who plan on buying the new GPUs > In Benchmark 5, The RTX Benchmark we see **125%** faster renders with the RTX 4090 compared to the RTX 3090, and **116%** faster renders in the Cuda Benchmark > > Best, > Muhammed Hello @Muhammed_Hamed , thanks for this. What would you do in combination with a 3990x? One 4090 or two 3090? Thanks, Hani Edit: Found already the answer in another thread from you … ---
**Author:** ![Muhammed\_Hamed](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/muhammed_hamed/32/73779_2.png) [@Muhammed\_Hamed](https://forums.chaos.com/u/Muhammed_Hamed)\ **Post date:** [November 15, 2022, 10:38am UTC](https://forums.chaos.com/t/topic/112319/8 "2022-11-15T10:38:51Z")
> [@haniel1107](#): > > Hello @Muhammed_Hamed , thanks for this. What would you do in combination with a 3990x? One 4090 or two 3090? > Thanks, > Hani > > Edit: Found already the answer in another thread from you … Hey! I have my 4090 now, it is basically 2x 3090s running at much lower power consumption and temperature. I like this experience quite a lot The only reason you would go for 2x3090s is NVlink, other than that the 4090 is as fast as 2x3090s and a lot easier to cool Best, Muhammed ---
**Author:** ![haniel1107](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/haniel1107/32/37099_2.png) [@haniel1107](https://forums.chaos.com/u/haniel1107)\ **Post date:** [November 15, 2022, 10:41am UTC](https://forums.chaos.com/t/topic/112319/9 "2022-11-15T10:41:56Z")
> [@Muhammed\_Hamed](#): > > Hey! > > I have my 4090 now, it is basically 2x 3090s running at much lower power consumption and temperature. I like this experience quite a lot > The only reason you would go for 2x3090s is NVlink, other than that the 4090 is as fast as 2x3090s and a lot easier to cool > > Best, > Muhammed Hi Muhammed, yes, I thought so, too. But good to get it confirmed by you! I will go for one 4090, too. Which one do you have? Thanks a lot! Hani ---
**Author:** ![Muhammed\_Hamed](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/muhammed_hamed/32/73779_2.png) [@Muhammed\_Hamed](https://forums.chaos.com/u/Muhammed_Hamed)\ **Post date:** [November 15, 2022, 11:02am UTC](https://forums.chaos.com/t/topic/112319/10 "2022-11-15T11:02:46Z")
> [@Markus](#): > > I found this statement: > "Nvidia CEO Jensen Huang confirmed that the company is doing away with its NVLink bridge. Replacing NVLink is PCIe Gen 5, which Huang and Nvidia claimed will be sufficiently fast to connect multiple GPUs together, " > > What does this mean? Will it be possible that we have a replacement for the NVlink feature over the PCIe bus? They are working on a replacement yes, but we haven’t seen anything yet I hope we will be able to see/test something soon Best, Muhammed ---
**Author:** ![Muhammed\_Hamed](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/muhammed_hamed/32/73779_2.png) [@Muhammed\_Hamed](https://forums.chaos.com/u/Muhammed_Hamed)\ **Post date:** [November 15, 2022, 11:05am UTC](https://forums.chaos.com/t/topic/112319/11 "2022-11-15T11:05:32Z")
> [@haniel1107](#): > > Hi Muhammed, > yes, I thought so, too. But good to get it confirmed by you! > > I will go for one 4090, too. > Which one do you have? > > Thanks a lot! > Hani Asus TUF Gaming OC But feel free to go for the cheapest one you find, the differences on the cooling/specs are minor for typical use(unless you plan on extreme overclocking) Keep in mind these cards have cooling designed for 600 Watts, while running at 400 to 450 usually.. my card runs below 60 degrees on rendering Best, Muhammed ---
**Author:** ![filip](https://avatars.discourse-cdn.com/v4/letter/f/919ad9/32.png) [@filip](https://forums.chaos.com/u/filip)\ **Post date:** [November 15, 2022, 8:37pm UTC](https://forums.chaos.com/t/topic/112319/12 "2022-11-15T20:37:47Z")
Hi Muhammed, I am just wondering what is your wattage during the vray rendering? Mine never go above 300W comparing to the 3090 which uses close to 350W, is it something with I dont use all 4 full pcie cables to the adapter (one is split)? Same with vray benchmark, but the results are good. All three cards have dual bios set to Power. F ---
**Author:** ![Muhammed\_Hamed](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/muhammed_hamed/32/73779_2.png) [@Muhammed\_Hamed](https://forums.chaos.com/u/Muhammed_Hamed)\ **Post date:** [November 16, 2022, 11:30am UTC](https://forums.chaos.com/t/topic/112319/13 "2022-11-16T11:30:16Z")
> [@filip](#): > > Hi Muhammed, I am just wondering what is your wattage during the vray rendering? Mine never go above 300W comparing to the 3090 which uses close to 350W, is it something with I dont use all 4 full pcie cables to the adapter (one is split)? Same with vray benchmark, but the results are good. All three cards have dual bios set to Power. F Same here, it looks like GPU rendering doesn’t push these GPUs on power draw as high as some of the games does In games I get 480 watts power draw which makes the GPU a lot hotter, and around 300 in Octane/V-Ray GPU As long as the scores are fine, it is not an issue I think. On the bright side, the cards run very cool Best, Muhammed ---
**Author:** ![psanitra](https://avatars.discourse-cdn.com/v4/letter/p/85f322/32.png) [@psanitra](https://forums.chaos.com/u/psanitra)\ **Post date:** [December 14, 2022, 2:57pm UTC](https://forums.chaos.com/t/topic/112319/14 "2022-12-14T14:57:08Z")
This new 4090 is pretty impressive, got my Aorus Extreme waterforce(it`s the one with aio and 3 fans), and it never goes above 275W when rendering with V-Ray. Even after 1h of rendering, fans only spin at 30%(zero noise) and temp under 55C. Damn, I need to get one more 🙂