# Using VrayHDRI map in Vray dome - some buckets use wrong subdivs

**URL:** <https://forums.chaos.com/t/using-vrayhdri-map-in-vray-dome-some-buckets-use-wrong-subdivs/48022>\
**Category:** Issues\
**Created:** [December 6, 2013, 2:18pm UTC](https://forums.chaos.com/t/using-vrayhdri-map-in-vray-dome-some-buckets-use-wrong-subdivs/48022 "2013-12-06T14:18:03Z")\
**Posts on this page:** 14\
**Page:** 1

<div class="post-metadata">

**Author:** ![AlexP](https://avatars.discourse-cdn.com/v4/letter/a/e9a140/32.png) [@AlexP](https://forums.chaos.com/u/AlexP)\
**Post date:** [December 6, 2013, 2:18pm UTC](https://forums.chaos.com/t/using-vrayhdri-map-in-vray-dome-some-buckets-use-wrong-subdivs/48022/1 "2013-12-06T14:18:03Z")

</div>

Dome light set to 512 with VrayHDRI map using free PureLight hdri from Ronen Bekerman site. Perfectly smooth and clean result.

For no obvious reason it suddenly started rendering like this. Only a few clean buckets, the rest seemed to default to 8 subdivs on the dome light.

Through a tedious process of troubleshooting, it’s down to the VrayHDRI map. If I swap that out with a normal Bitmap loader, then it’s fine.  
If i reduce the subdivs on the dome light to 8, then all buckets are the same.  
Its only present in the VrayLighting pass (other than beauty pass)

Also this isnt the only place it happened in this image, nor is it the only scene it has happened on.

Tested this on 2013 + 2.3 as well as 2014 + 2.4 and got the same result.

HDRI is UNC mapped on the network, I made sure to test this as well.

Any ideas??

 ![2013-12-06Flexroom10000.jpg](https://europe1.discourse-cdn.com/chaosprd/original/3X/8/e/8e6eaeb5f3d0be4308d76a48e394044f4499ec97.jpeg)

---

<div class="post-metadata">

**Author:** ![vlado](https://avatars.discourse-cdn.com/v4/letter/v/779978/32.png) [@vlado](https://forums.chaos.com/u/vlado)\
**Post date:** [December 6, 2013, 2:47pm UTC](https://forums.chaos.com/t/using-vrayhdri-map-in-vray-dome-some-buckets-use-wrong-subdivs/48022/2 "2013-12-06T14:47:23Z")

</div>

Can you get us the scene to [vray@chaosgroup.com](mailto:vray@chaosgroup.com) so that we can check it out?

Best regards,  
Vlado

---

<div class="post-metadata">

**Author:** ![AlexP](https://avatars.discourse-cdn.com/v4/letter/a/e9a140/32.png) [@AlexP](https://forums.chaos.com/u/AlexP)\
**Post date:** [December 6, 2013, 3:02pm UTC](https://forums.chaos.com/t/using-vrayhdri-map-in-vray-dome-some-buckets-use-wrong-subdivs/48022/3 "2013-12-06T15:02:06Z")

</div>

> [@VRay Displacement stepping](https://forums.chaos.com/t/vray-displacement-stepping/43662/4):
>
> Can you get us the scene to [vray@chaosgroup.com](mailto:vray@chaosgroup.com) so that we can check it out?
> 
> Best regards,  
> Vlado

Yes, will send over.

---

<div class="post-metadata">

**Author:** ![AlexP](https://avatars.discourse-cdn.com/v4/letter/a/e9a140/32.png) [@AlexP](https://forums.chaos.com/u/AlexP)\
**Post date:** [December 6, 2013, 5:30pm UTC](https://forums.chaos.com/t/using-vrayhdri-map-in-vray-dome-some-buckets-use-wrong-subdivs/48022/4 "2013-12-06T17:30:01Z")

</div>

Dropbox link sent to [vray@chaosgroup.com](mailto:vray@chaosgroup.com)

---

<div class="post-metadata">

**Author:** ![tashko.zashev](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/tashko.zashev/32/275280_2.png) [@tashko.zashev](https://forums.chaos.com/u/tashko.zashev)\
**Post date:** [December 10, 2013, 10:07am UTC](https://forums.chaos.com/t/using-vrayhdri-map-in-vray-dome-some-buckets-use-wrong-subdivs/48022/5 "2013-12-10T10:07:25Z")

</div>

If anyone interested about this issue, it turns out that very high Dome light sampling quality may leads to difference in the rendered buckets.  
We will fix this for the 2.x builds, as the 3.0 works fine.

Thank you for your feedback Alex.

---

<div class="post-metadata">

**Author:** ![AlexP](https://avatars.discourse-cdn.com/v4/letter/a/e9a140/32.png) [@AlexP](https://forums.chaos.com/u/AlexP)\
**Post date:** [December 10, 2013, 3:17pm UTC](https://forums.chaos.com/t/using-vrayhdri-map-in-vray-dome-some-buckets-use-wrong-subdivs/48022/6 "2013-12-10T15:17:28Z")

</div>

Cool, good to know. Thanks

---

<div class="post-metadata">

**Author:** ![trixian](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/trixian/32/60402_2.png) [@trixian](https://forums.chaos.com/u/trixian)\
**Post date:** [December 12, 2013, 1:03pm UTC](https://forums.chaos.com/t/using-vrayhdri-map-in-vray-dome-some-buckets-use-wrong-subdivs/48022/7 "2013-12-12T13:03:33Z")

</div>

What is “very high”?  
Over 128, or 256?

---

<div class="post-metadata">

**Author:** ![AlexP](https://avatars.discourse-cdn.com/v4/letter/a/e9a140/32.png) [@AlexP](https://forums.chaos.com/u/AlexP)\
**Post date:** [December 13, 2013, 10:32am UTC](https://forums.chaos.com/t/using-vrayhdri-map-in-vray-dome-some-buckets-use-wrong-subdivs/48022/8 "2013-12-13T10:32:47Z")

</div>

This one was set to 512

---

<div class="post-metadata">

**Author:** ![trixian](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/trixian/32/60402_2.png) [@trixian](https://forums.chaos.com/u/trixian)\
**Post date:** [December 13, 2013, 12:35pm UTC](https://forums.chaos.com/t/using-vrayhdri-map-in-vray-dome-some-buckets-use-wrong-subdivs/48022/9 "2013-12-13T12:35:02Z")

</div>

ah. ok.

I’m curious, does it glitch like this when set to use irradience map as well?  
I have only tried setting it really high when checking that option.

---

<div class="post-metadata">

**Author:** ![AlexP](https://avatars.discourse-cdn.com/v4/letter/a/e9a140/32.png) [@AlexP](https://forums.chaos.com/u/AlexP)\
**Post date:** [May 12, 2014, 9:39am UTC](https://forums.chaos.com/t/using-vrayhdri-map-in-vray-dome-some-buckets-use-wrong-subdivs/48022/10 "2014-05-12T09:39:46Z")

</div>

Just wondering if there has there been a fix for this issue? Im getting it again on a scene at the moment.

I can email it if need be?

---

<div class="post-metadata">

**Author:** ![tashko.zashev](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/tashko.zashev/32/275280_2.png) [@tashko.zashev](https://forums.chaos.com/u/tashko.zashev)\
**Post date:** [May 12, 2014, 9:46am UTC](https://forums.chaos.com/t/using-vrayhdri-map-in-vray-dome-some-buckets-use-wrong-subdivs/48022/11 "2014-05-12T09:46:51Z")

</div>

Hi Alex,

Unfortunately we are still working to fix this bug. As soon as we have any update on this case will post here.

---

<div class="post-metadata">

**Author:** ![AlexP](https://avatars.discourse-cdn.com/v4/letter/a/e9a140/32.png) [@AlexP](https://forums.chaos.com/u/AlexP)\
**Post date:** [May 12, 2014, 10:45am UTC](https://forums.chaos.com/t/using-vrayhdri-map-in-vray-dome-some-buckets-use-wrong-subdivs/48022/12 "2014-05-12T10:45:35Z")

</div>

Ok thanks. Any workarounds?

---

<div class="post-metadata">

**Author:** ![AlexP](https://avatars.discourse-cdn.com/v4/letter/a/e9a140/32.png) [@AlexP](https://forums.chaos.com/u/AlexP)\
**Post date:** [May 12, 2014, 11:08am UTC](https://forums.chaos.com/t/using-vrayhdri-map-in-vray-dome-some-buckets-use-wrong-subdivs/48022/13 "2014-05-12T11:08:30Z")

</div>

FWIW it disappears if I raise the min subdivs  
In this instance, Im using good old 1/100 and moving to 4/100 gets rid of it.

---

<div class="post-metadata">

**Author:** ![tashko.zashev](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/tashko.zashev/32/275280_2.png) [@tashko.zashev](https://forums.chaos.com/u/tashko.zashev)\
**Post date:** [May 12, 2014, 11:45am UTC](https://forums.chaos.com/t/using-vrayhdri-map-in-vray-dome-some-buckets-use-wrong-subdivs/48022/14 "2014-05-12T11:45:57Z")

</div>

> [@On another topic](https://forums.chaos.com/t/44732/11):
>
> FWIW it disappears if I raise the min subdivs  
> In this instance, Im using good old 1/100 and moving to 4/100 gets rid of it.

Good to know that, thanks.

AA Subdiv. Min. 3 seems to also works well in my tests. Also you could try to decrease the Adaptive amount value with 0.1
