# vRay Fur

**URL:** <https://forums.chaos.com/t/vray-fur/26149>\
**Category:** General\
**Created:** [November 22, 2010, 4:29pm UTC](https://forums.chaos.com/t/vray-fur/26149 "2010-11-22T16:29:08Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![cdavis](https://avatars.discourse-cdn.com/v4/letter/c/e9bcb4/32.png) [@cdavis](https://forums.chaos.com/u/cdavis)\
**Post date:** [November 22, 2010, 4:29pm UTC](https://forums.chaos.com/t/vray-fur/26149/1 "2010-11-22T16:29:08Z")

</div>

Im doing some tests with Vray fur & have got it looking fantastic. Is it possible to drive direction by UV maps? Im finding it hard to get it to follow the contour of my model. Ive tried maya hair & rendering with vray but Cant get it looking that good. As i say, got vray fur looking bang on, just need to try & get it to do what i want!

---

<div class="post-metadata">

**Author:** ![garage3d](https://avatars.discourse-cdn.com/v4/letter/g/9e8a1a/32.png) [@garage3d](https://forums.chaos.com/u/garage3d)\
**Post date:** [November 22, 2010, 5:31pm UTC](https://forums.chaos.com/t/vray-fur/26149/2 "2010-11-22T17:31:06Z")

</div>

show us some render man!

any flickering in animation?

---

<div class="post-metadata">

**Author:** ![vlado](https://avatars.discourse-cdn.com/v4/letter/v/779978/32.png) [@vlado](https://forums.chaos.com/u/vlado)\
**Post date:** [November 22, 2010, 5:35pm UTC](https://forums.chaos.com/t/vray-fur/26149/3 "2010-11-22T17:35:32Z")

</div>

You can use the bend direction and initial direciton texture slots to change the orientation of the strands; these are more or less like normal maps, relative to a specified UV set (the “UV Bases Set” one).

Best regards,  
Vlado

---

<div class="post-metadata">

**Author:** ![cdavis](https://avatars.discourse-cdn.com/v4/letter/c/e9bcb4/32.png) [@cdavis](https://forums.chaos.com/u/cdavis)\
**Post date:** [November 22, 2010, 5:37pm UTC](https://forums.chaos.com/t/vray-fur/26149/4 "2010-11-22T17:37:38Z")

</div>

nothing too amazing. its just a ball with some teddy bear fur , but its just what I want. just cant get it to work on anything that isnt a sphere.  
whats your email ill mail you a render.

---

<div class="post-metadata">

**Author:** ![cdavis](https://avatars.discourse-cdn.com/v4/letter/c/e9bcb4/32.png) [@cdavis](https://forums.chaos.com/u/cdavis)\
**Post date:** [November 22, 2010, 5:41pm UTC](https://forums.chaos.com/t/vray-fur/26149/5 "2010-11-22T17:41:08Z")

</div>

im trying that, I have just got a cylinder & applied a bend deformer. I’ve been putting a ramp into the initial direction slot & changing colours to see if I get different results but none seem to make it go straight down the tube. But it seems to twist itself around the tube( uv’s are laid out correctly)

---

<div class="post-metadata">

**Author:** ![vlado](https://avatars.discourse-cdn.com/v4/letter/v/779978/32.png) [@vlado](https://forums.chaos.com/u/vlado)\
**Post date:** [November 22, 2010, 5:43pm UTC](https://forums.chaos.com/t/vray-fur/26149/6 "2010-11-22T17:43:52Z")

</div>

In particular, if you want the fur to follow the “U” direction of the surface, set the gravity to 0.0, assign a checker texture to the “Bend direction” texture with both colors set to RGB 0, 0.5, 1.0 (or 0, 128, 255).

Best regards,  
Vlado

---

<div class="post-metadata">

**Author:** ![vlado](https://avatars.discourse-cdn.com/v4/letter/v/779978/32.png) [@vlado](https://forums.chaos.com/u/vlado)\
**Post date:** [November 22, 2010, 5:45pm UTC](https://forums.chaos.com/t/vray-fur/26149/7 "2010-11-22T17:45:19Z")

</div>

For the “V” direction, set the colors to RGB 0.5, 0.0, 1.0 (or 128, 0, 255).

Best regards,  
Vlado

---

<div class="post-metadata">

**Author:** ![cdavis](https://avatars.discourse-cdn.com/v4/letter/c/e9bcb4/32.png) [@cdavis](https://forums.chaos.com/u/cdavis)\
**Post date:** [November 22, 2010, 5:51pm UTC](https://forums.chaos.com/t/vray-fur/26149/8 "2010-11-22T17:51:19Z")

</div>

OK. I see.that works, thanks for the pointers.

Chris

---

<div class="post-metadata">

**Author:** ![vlado](https://avatars.discourse-cdn.com/v4/letter/v/779978/32.png) [@vlado](https://forums.chaos.com/u/vlado)\
**Post date:** [November 22, 2010, 6:03pm UTC](https://forums.chaos.com/t/vray-fur/26149/9 "2010-11-22T18:03:19Z")

</div>

Here are some more examples; the color values are in the file names (e.g. \_05\_00\_10 is RGB 0.5, 0.0, 1.0).

Best regards,  
Vlado

 ![fur_05_00_10.jpg](https://europe1.discourse-cdn.com/chaosprd/original/3X/1/f/1fad849f357f726c024255156a2601cf1930e21f.jpeg)  
 ![fur_00_05_10.jpg](https://europe1.discourse-cdn.com/chaosprd/original/3X/1/a/1a5d45c538ba4bc59f46c25d97550e4056372fef.jpeg)  
 ![fur_05_10_10.jpg](https://europe1.discourse-cdn.com/chaosprd/original/3X/a/5/a51179c1b2ddff8740ac6c10d8bc270a93dd4c42.jpeg)  
 ![fur_10_05_10.jpg](https://europe1.discourse-cdn.com/chaosprd/original/3X/e/3/e332fea4f4456a627297e04f340e226426aec801.jpeg)

---

<div class="post-metadata">

**Author:** ![cdavis](https://avatars.discourse-cdn.com/v4/letter/c/e9bcb4/32.png) [@cdavis](https://forums.chaos.com/u/cdavis)\
**Post date:** [November 22, 2010, 6:14pm UTC](https://forums.chaos.com/t/vray-fur/26149/10 "2010-11-22T18:14:07Z")

</div>

ok, cool. Thanks

Do you know of any of your customers who are using the fur in production?

---

<div class="post-metadata">

**Author:** ![vlado](https://avatars.discourse-cdn.com/v4/letter/v/779978/32.png) [@vlado](https://forums.chaos.com/u/vlado)\
**Post date:** [November 22, 2010, 6:15pm UTC](https://forums.chaos.com/t/vray-fur/26149/11 "2010-11-22T18:15:52Z")

</div>

I know some people have used it, but not much more beyond that.

Best regards,  
Vlado

---

<div class="post-metadata">

**Author:** ![cdavis](https://avatars.discourse-cdn.com/v4/letter/c/e9bcb4/32.png) [@cdavis](https://forums.chaos.com/u/cdavis)\
**Post date:** [November 26, 2010, 8:58pm UTC](https://forums.chaos.com/t/vray-fur/26149/12 "2010-11-26T20:58:38Z")

</div>

would it be possible to request that we be able to add multiple fur attributes to a single mesh? is that possible?

---

<div class="post-metadata">

**Author:** ![vlado](https://avatars.discourse-cdn.com/v4/letter/v/779978/32.png) [@vlado](https://forums.chaos.com/u/vlado)\
**Post date:** [November 27, 2010, 12:06am UTC](https://forums.chaos.com/t/vray-fur/26149/13 "2010-11-27T00:06:42Z")

</div>

There shouldn’t be problems to do this even now.

Best regards,  
Vlado

---

<div class="post-metadata">

**Author:** ![cdavis](https://avatars.discourse-cdn.com/v4/letter/c/e9bcb4/32.png) [@cdavis](https://forums.chaos.com/u/cdavis)\
**Post date:** [November 28, 2010, 12:41pm UTC](https://forums.chaos.com/t/vray-fur/26149/14 "2010-11-28T12:41:20Z")

</div>

it adds another fur attribute but no extrat fur appears or renders .

---

<div class="post-metadata">

**Author:** ![vlado](https://avatars.discourse-cdn.com/v4/letter/v/779978/32.png) [@vlado](https://forums.chaos.com/u/vlado)\
**Post date:** [November 28, 2010, 9:22pm UTC](https://forums.chaos.com/t/vray-fur/26149/15 "2010-11-28T21:22:34Z")

</div>

It works for me - for the attached image I added two V-Ray fur properties to the same object.

Best regards,  
Vlado

 ![multi_fur.jpg](https://europe1.discourse-cdn.com/chaosprd/original/3X/b/e/be9e0f9531c78d74113f21776ea0d1f20994cd42.jpeg)

---

<div class="post-metadata">

**Author:** ![hellobard](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/hellobard/32/23661_2.png) [@hellobard](https://forums.chaos.com/u/hellobard)\
**Post date:** [November 29, 2010, 8:32am UTC](https://forums.chaos.com/t/vray-fur/26149/16 "2010-11-29T08:32:18Z")

</div>

i don’t mean to hog this thread, but while we’re on the subject. is there a way to connect a Wind node from Nucleus to VrayFur? if not, can we add it to the wish-list? 😄 i found another thread in the max section about this from 2007, and they seemed keen on it too…

---

<div class="post-metadata">

**Author:** ![cdavis](https://avatars.discourse-cdn.com/v4/letter/c/e9bcb4/32.png) [@cdavis](https://forums.chaos.com/u/cdavis)\
**Post date:** [November 29, 2010, 9:05am UTC](https://forums.chaos.com/t/vray-fur/26149/17 "2010-11-29T09:05:19Z")

</div>

OK. did a re-install & it works fine.

Thanks

Chris

---

<div class="post-metadata">

**Author:** ![liamchapple](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/liamchapple/32/58168_2.png) [@liamchapple](https://forums.chaos.com/u/liamchapple)\
**Post date:** [November 29, 2010, 5:40pm UTC](https://forums.chaos.com/t/vray-fur/26149/18 "2010-11-29T17:40:11Z")

</div>

Hi,

Is there any way to drive vRay fur using maya hair or is there another method to make it dynamic?

It doesn’t how up in the maya fur drop-down (understandably) and I assume not, but thought I’d ask.

Thanks in advance.

Liam

---

<div class="post-metadata">

**Author:** ![vlado](https://avatars.discourse-cdn.com/v4/letter/v/779978/32.png) [@vlado](https://forums.chaos.com/u/vlado)\
**Post date:** [December 1, 2010, 5:49pm UTC](https://forums.chaos.com/t/vray-fur/26149/19 "2010-12-01T17:49:50Z")

</div>

No, for the time being there is no way to make it dynamic in this way. It would have been possible if we had some access to the Maya fur data, but this is not the case, unfortunately.

Best regards,  
Vlado

---

<div class="post-metadata">

**Author:** ![cdavis](https://avatars.discourse-cdn.com/v4/letter/c/e9bcb4/32.png) [@cdavis](https://forums.chaos.com/u/cdavis)\
**Post date:** [December 1, 2010, 8:17pm UTC](https://forums.chaos.com/t/vray-fur/26149/20 "2010-12-01T20:17:02Z")

</div>

Vlado, are there plans to further develop the vray fur and make it more usable in the future , adding things like grooming & dynamics etc?  
Because its really good quality & very fast compared to other fur ive used, would be great to have a bit more control.

Thanks

Chris

[Next page](https://forums.chaos.com/t/vray-fur/26149.md?page=2)
