# Vray Light Material - Illuminate without GI

**URL:** <https://forums.chaos.com/t/vray-light-material-illuminate-without-gi/53663>\
**Category:** General\
**Tags:** vray-light-material\
**Created:** [May 5, 2015, 4:54pm UTC](https://forums.chaos.com/t/vray-light-material-illuminate-without-gi/53663 "2015-05-05T16:54:58Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![cum.m\_d](https://avatars.discourse-cdn.com/v4/letter/c/82dd89/32.png) [@cum.m\_d](https://forums.chaos.com/u/cum.m_d)\
**Post date:** [May 5, 2015, 4:54pm UTC](https://forums.chaos.com/t/vray-light-material-illuminate-without-gi/53663/1 "2015-05-05T16:54:58Z")

</div>

Hey guys, i didn’t have time to really test this proper so this question might be simple.

I have an object that is emitting light from all four corners. To simulate this, I initially used a Vray rectangle light with double sided turned on. This worked except for one issue, it left a visible shadow right at the line of the area light. This caused a shadow line all around the objects surrounding it. However, its supposed to be more like a multicolored light bulbs (in a way) surrounding the objects corners so it should not have this area that is missed.

To simulate the effect properly, I switched to vray light material, however, when I do it this way, the scene isn’t illuminated. I have to activate GI which increases render time and honestly, I am worried it’ll flicker.

Is there something I missed? Do I really need GI for Vray light material to work? Thank you!

---

<div class="post-metadata">

**Author:** ![vlado](https://avatars.discourse-cdn.com/v4/letter/v/779978/32.png) [@vlado](https://forums.chaos.com/u/vlado)\
**Post date:** [May 5, 2015, 5:00pm UTC](https://forums.chaos.com/t/vray-light-material-illuminate-without-gi/53663/2 "2015-05-05T17:00:16Z")

</div>

You can create a mesh light (Create \> V-Ray \> Turn mesh into light). GI would still be useful to reduce the noise a bit.

Best regards,  
Vlado

---

<div class="post-metadata">

**Author:** ![cum.m\_d](https://avatars.discourse-cdn.com/v4/letter/c/82dd89/32.png) [@cum.m\_d](https://forums.chaos.com/u/cum.m_d)\
**Post date:** [May 7, 2015, 5:35am UTC](https://forums.chaos.com/t/vray-light-material-illuminate-without-gi/53663/3 "2015-05-07T05:35:33Z")

</div>

Hello Vlado,

Thanks for the advise. When I did that, the colored ramp texture did not work. It is connected however, the light source renders pure white.

I intend to have an animated texture illuminate this light source so I will probably connect animated jps or tiffs after

---

<div class="post-metadata">

**Author:** ![Zdravko.Keremidchiev](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/zdravko.keremidchiev/32/48745_2.png) [@Zdravko.Keremidchiev](https://forums.chaos.com/u/Zdravko.Keremidchiev)\
**Post date:** [May 8, 2015, 3:07pm UTC](https://forums.chaos.com/t/vray-light-material-illuminate-without-gi/53663/4 "2015-05-08T15:07:51Z")

</div>

> I switched to vray light material, however, when I do it this way, the scene isn’t illuminated.  
> If you want VRayLightMtl to illuminate the scene without the use of GI you need to enable its direct illumination option.

> I intend to have an animated texture illuminate this light source so I will probably connect animated jps or tiffs after  
> If the intensity of the light is higher than 1 it is normal to get burn-out textures. Would it be possible to send us an example of the effect that you are after.
