# vrmap file??

**URL:** <https://forums.chaos.com/t/vrmap-file/4985>\
**Category:** General\
**Created:** [September 3, 2004, 7:35pm UTC](https://forums.chaos.com/t/vrmap-file/4985 "2004-09-03T19:35:06Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![tri-xy68](https://avatars.discourse-cdn.com/v4/letter/t/ea5d25/32.png) [@tri-xy68](https://forums.chaos.com/u/tri-xy68)\
**Post date:** [September 3, 2004, 7:35pm UTC](https://forums.chaos.com/t/vrmap-file/4985/1 "2004-09-03T19:35:06Z")

</div>

I am new to Vray and have been trying to get the rendertimes down. I found a tutorial or someone told me to render a very small size image with all the settings I want for my final image and to save the vrmap to a file to use later with a large size render. I have tried this and seems to work very well in theory as the very small rendered image takes a very short time. I now use that file and generate the larger image. So far so good. The large size image renders very fast, which is great, but it is extremely dark?? Am I doing something wrong? I am using single frame mode, which the person that suggested this to me said to use bucket mode but I don’t think that would make that much difference?? Anyone have some advise. It would be great appreciated.  
Thanks Peter.

---

<div class="post-metadata">

**Author:** ![natty](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/natty/32/22731_2.png) [@natty](https://forums.chaos.com/u/natty)\
**Post date:** [September 3, 2004, 8:00pm UTC](https://forums.chaos.com/t/vrmap-file/4985/2 "2004-09-03T20:00:07Z")

</div>

Hi

well what you should really do is render out an Irr map @ half the size of the fall size image that you want to render. When the Irr map has rendered you need to load that in … so choose from file.. then render azt your production size and increase the AA a Little just to sharpen, because the Irr map will be slightly Blurred.

edit :: in the global settings it would be a good idea to turn off render final image

---

<div class="post-metadata">

**Author:** ![tri-xy68](https://avatars.discourse-cdn.com/v4/letter/t/ea5d25/32.png) [@tri-xy68](https://forums.chaos.com/u/tri-xy68)\
**Post date:** [September 4, 2004, 5:40pm UTC](https://forums.chaos.com/t/vrmap-file/4985/3 "2004-09-04T17:40:03Z")

</div>

Thanks for the response Natty. Here are my settings.

image sampler(Antialiasing) -

simple two-level - base 1, fine 4

GI - first bounce - 3.5, Irradiance map (high) (-3,0)

secondary 0.75 (NONE checked)

Irradiance map - Single Frame

Is it optimal to only generate and save the Irradiance map for half size of the final image? Are there any other settings I could lower for calculating the map and then punch up for the final image?

I thought on a different project I was using like 240X340 or something and then using that vrmap to calculate 2400x3400, I may be mistaken. I’m just trying to find the optimal because my model is getting quite large as I am using it for design testing of interior and exterior as well. Thanks again for any help.

Regards Peter.

---

<div class="post-metadata">

**Author:** ![percydaman](https://dub1.discourse-cdn.com/chaosprd/user_avatar/forums.chaos.com/percydaman/32/42214_2.png) [@percydaman](https://forums.chaos.com/u/percydaman)\
**Post date:** [September 4, 2004, 5:49pm UTC](https://forums.chaos.com/t/vrmap-file/4985/4 "2004-09-04T17:49:03Z")

</div>

I wouldn’t use a vrmap thats less then half the size of the final output. especially in the instance you provided. Also unless you have alot of glossy materials or DOF, Moblur, I would use the adaptive AA as opposed to the 2 level, itll be faster. Finally, I personally only use a max of 0 for the irradiance map when its really necessary. If you can get away with using -1 for the max, then Id go that route.
