Announcement

Collapse
No announcement yet.

RPC FOCUS

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • RPC FOCUS

    TO GET NOT DEFOCUSED OR BLURRED RPC IS THERE A METHOD OR IS IT A RPC MODELS LIMIT??

    I noticed sometimes I get a sharp model other times the model look blurred

    Can I avoid this problem??

    If yes could u explain how??


    bye and thanks in advance
    Workstation: Asus p9x79WS I7 3930K Noctua NH-D14@4200GHz SE2011 16GB RAM Kingston Hyperx Beast SSD 500Gb Samsung x2 SATA3 WD raid edition4 64MB GTX760 2GB DDR5 CoolerMaster 690III

    https://www.facebook.com/essetreddi..../photos_albums

  • #2
    It started happening some time around the 1.09.02 versions.. for some reason now to get a good image out of them, you need to go in individually and lower the Blur on the bitmap in the RPC..
    Dave Buchhofer. // Vsaiwrk

    Comment


    • #3
      You could try setting the AA filter to Catmull-Rom.

      --Jon

      Comment


      • #4
        You could try setting the AA filter to Catmull-Rom.

        --Jon
        I have that porblem as well.....but I allready have my filter set to Catmull-Rom.....


        paul.

        Comment


        • #5
          yeah same here ... bad AA on them ... where the rest of the image is perfect the rpc's are blurred and jagged. so i just do it in post now, cant be bothered with the damn rpc
          Natty
          http://www.rendertime.co.uk

          Comment


          • #6
            Wow, I'm glad I'm not the only one with the problem. I just started comp'ing in my own car photos. Seems to work good for stills but I'll have to find a good solution for animations.
            Tim Nelson
            timnelson3d.com

            Comment


            • #7
              I've catmull rom too

              I've catmull rom yet too

              what can I do?

              Should I render them (rpc) with a previous version??

              thanks in advance
              Workstation: Asus p9x79WS I7 3930K Noctua NH-D14@4200GHz SE2011 16GB RAM Kingston Hyperx Beast SSD 500Gb Samsung x2 SATA3 WD raid edition4 64MB GTX760 2GB DDR5 CoolerMaster 690III

              https://www.facebook.com/essetreddi..../photos_albums

              Comment


              • #8
                2 dbuchhofer

                2 dbuchhofer

                the blur level wich could be to get good result?

                bye and thanks in advance
                Workstation: Asus p9x79WS I7 3930K Noctua NH-D14@4200GHz SE2011 16GB RAM Kingston Hyperx Beast SSD 500Gb Samsung x2 SATA3 WD raid edition4 64MB GTX760 2GB DDR5 CoolerMaster 690III

                https://www.facebook.com/essetreddi..../photos_albums

                Comment


                • #9
                  yeah pengo is right ... the blur level for the rpc map is set to 1.. after turning it down to 0.01 they do became slightly sharper, but not a great deal
                  Natty
                  http://www.rendertime.co.uk

                  Comment


                  • #10
                    2 natty

                    hey natty excuse me I don't understand as well english

                    Do u mean that with this method rpc model is not good enough?

                    I haven' tried yet

                    I would appreciate if u could be more clear I've not a good knowledge of english

                    thanks in advance
                    Workstation: Asus p9x79WS I7 3930K Noctua NH-D14@4200GHz SE2011 16GB RAM Kingston Hyperx Beast SSD 500Gb Samsung x2 SATA3 WD raid edition4 64MB GTX760 2GB DDR5 CoolerMaster 690III

                    https://www.facebook.com/essetreddi..../photos_albums

                    Comment


                    • #11
                      the map of the rpc is set to Blur level 1.0 set it to 0.01 and it becomes a little sharper
                      Natty
                      http://www.rendertime.co.uk

                      Comment


                      • #12
                        noone Knows a better solution for the problem

                        Thank u natty for the eplanation

                        noone Knows a better solution for the problem?

                        bye
                        Workstation: Asus p9x79WS I7 3930K Noctua NH-D14@4200GHz SE2011 16GB RAM Kingston Hyperx Beast SSD 500Gb Samsung x2 SATA3 WD raid edition4 64MB GTX760 2GB DDR5 CoolerMaster 690III

                        https://www.facebook.com/essetreddi..../photos_albums

                        Comment


                        • #13
                          I tried the solution u suggests

                          I tried the solution u suggests I mean the blur factor from 1 to 0.01 but the results is still very bad so....

                          I'm trying with old version and I notice that the g version(1.09.03g) don't give blurred rpc models but perfectly sharped

                          I hope in a fix for this problem by the greats VLADO and PETER

                          bye
                          Workstation: Asus p9x79WS I7 3930K Noctua NH-D14@4200GHz SE2011 16GB RAM Kingston Hyperx Beast SSD 500Gb Samsung x2 SATA3 WD raid edition4 64MB GTX760 2GB DDR5 CoolerMaster 690III

                          https://www.facebook.com/essetreddi..../photos_albums

                          Comment

                          Working...
                          X