Hi,
I've just started to use VrayClipper but have a problem. See the smudged Ink effect on these images:
VrayClipper problem by Phil Grayston, on Flickr
VrayClipper problem by Phil Grayston, on Flickr
The geometry was saved out from ArchiCAD as a 3DS file. I've tried to Weld geometry round that area but it hasn't helped. Nothing changes with or without Embree.
Vray 3.40.02
As per this old thread (http://forums.chaosgroup.com/showthr...ipper+geometry)
Any ideas on how to cure this?
I've just started to use VrayClipper but have a problem. See the smudged Ink effect on these images:
![](https://c7.staticflickr.com/9/8805/28179844222_8f2dfb75c2_b.jpg)
![](https://c7.staticflickr.com/9/8845/28179844382_ae129a67bb_b.jpg)
The geometry was saved out from ArchiCAD as a 3DS file. I've tried to Weld geometry round that area but it hasn't helped. Nothing changes with or without Embree.
Vray 3.40.02
As per this old thread (http://forums.chaosgroup.com/showthr...ipper+geometry)
Any ideas on how to cure this?
Comment