Archived Old Bugs

[Paul Oblomov]

***PLEASE POST ALL RC2 BUGS HERE***

Downloaded just one minute ago - Material Preview seems broken.

Edit - broken when you doesn't click on material layer!

DAMN I HATE THAT BEHAVIOUR!!! It just locks my precious Rhino ;(

[Paul Oblomov]

***PLEASE POST ALL RC2 BUGS HERE***

Material can't be applied, if there's no open material editor dialog first.
http://img221.imageshack.us/img221/5864/snap23dg.jpg

[corey]

***PLEASE POST ALL RC2 BUGS HERE***

Paul,

You are so kind and gentle. I wish we could all hug you!! You are like the V-ray for Rhino teddy bear.

This is a problem that I can reproduce. For the time being just remember to select the material name before hitting the material update.

Best regards,

Corey

[Paul Oblomov]

***PLEASE POST ALL RC2 BUGS HERE***

Mat preview locks Rhino if:
create default material, preview, delete diffuse layer, add refraction layer, preview - 100% CPU usage and no way to unfreeze Rhino

edit
Hm... Now can't reproduce. Maybe I need to do smth else, before this'll happen...

Crubadue

[Micha_cg]

***PLEASE POST ALL RC2 BUGS HERE***

Corey, thank you for the new release. So much improvements.

I have a big wish for a better workflow. If I right click on a material at the material editor, than I get dialog. Could you add a "assign" command please. Allways if I create a material I must go to the object properties --> material --> browse --> select material --> ok. This is soooo long. Other plugins like Rhinoman or Rhinoll do it so too.

[Micha_cg]

Re: ***PLEASE POST ALL RC2 BUGS HERE***

Downloaded just one minute ago - Material Preview seems broken.

Edit - broken when you doesn't click on material layer!

DAMN I HATE THAT BEHAVIOUR!!! It just locks my precious Rhino ;(

Why so angry? It's a RC version. Do you have seen the list of fixed bugs? I feel, ASGvis is working hard to get it ready. In a few weeks it will be stable.

I use VfR for my daily work now. And if a version is not stable enough, I test it at my home machine for bug reports only. Version RC1 is quite stable for work. Maybe you should stick on RC1. I don't install the newest release at my workmachine immediately, most I wait a few days and test it on my second machine.

[joe_b]

***PLEASE POST ALL RC2 BUGS HERE***

Mat preview locks Rhino if:
create default material, preview, delete diffuse layer, add refraction layer, preview - 100% CPU usage and no way to unfreeze Rhino

Crubadue

I have not been able to reproduce this issue. Are you sure you have a layer in the material when you try to preview it?

As far as your previous post (the non-existant material rendering)- you brought this to our attention in the last build. For the time being just have a valid material when you want to preview it. In our changes log we didn't say that we fixed this issue. I'm sorry if we didn't introduce enough bug fixes and additions in this build to suit your needs.


[edit]
Ok Corey has shown me how to create that issue. I promise you it won't bother you again

[joe_b]

***PLEASE POST ALL RC2 BUGS HERE***

Corey, thank you for the new release. So much improvements.

I have a big wish for a better workflow. If I right click on a material at the material editor, than I get dialog. Could you add a "assign" command please. Allways if I create a material I must go to the object properties --> material --> browse --> select material --> ok. This is soooo long. Other plugins like Rhinoman or Rhinoll do it so too.

This is not a bug, please keep this in the general section or elsewhere.

[DarkLight]

***PLEASE POST ALL RC2 BUGS HERE***

Perfect version Corey and Joe, too much of improvements that I can't see all of them in several hours ) Anyway, there are two small things - after FIRST (first only) start of Rhino with freshly installed vray Rhino freeze when I open material editor. Shutdown Rhino, do the same again (open, go to mated) and it works... So, first run after Vray installation Rhino freezes in mated, same as in version 13.x and RC1 ... And next "bug" is small - on vray toolbar is not defined function for "About Vray" so it is only button, no function.

Hope it's useful feedback for you Keep working, finish is close to us

DarkLight

[Paul Oblomov]

***PLEASE POST ALL RC2 BUGS HERE***

Why so angry? It's a RC version.

I'm not angry. Just..... aaaa.... I always try to preview right after I see mat editor without clicking on layers etc. I need to see that cool grey sphere! It's a magic - can you imagine A Sphere in a Small Box ?

joeb

I promise you it won't bother you again

Thx BTW - Rhnio 4 is just getting closer to release. Latest beta will expire in August - so that makes me think, that this is the Last (hopefully) beta, prior to release! Maybe it's time to test VrfRh4 ?

P.S. Latin Supercube, not Latin Super Cube. I think...
http://citeseer.ist.psu.edu/context/292333/0

[joe_b]

***PLEASE POST ALL RC2 BUGS HERE***

after FIRST (first only) start of Rhino with freshly installed vray Rhino freeze when I open material editor. Shutdown Rhino, do the same again (open, go to mated) and it works... So, first run after Vray installation Rhino freezes in mated, same as in version 13.x and RC1
DarkLight

By "freeze" do you mean it just takes it a noticeable bit to show the material editor or does Rhino completely lock up?

[merlik585]

***PLEASE POST ALL RC2 BUGS HERE***

I had the exact same problem,and I had to kill Rhino,the second time around works perfect.

Renee

[joe_b]

***PLEASE POST ALL RC2 BUGS HERE***

I had the exact same problem,and I had to kill Rhino,the second time around works perfect.

Renee

Could you tell me more about the system you have? Operating system, procs, basic system info could help me find a way to reproduce this. Thanks

[joe_b]

***PLEASE POST ALL RC2 BUGS HERE***

I just found a bug where changes to a material do not take effect after the material has been renamed in the editor. To get around this for now - re-apply the material to whatever object/layer after you rename it.

Sorry for the inconveniance.

[Micha_cg]

***PLEASE POST ALL RC2 BUGS HERE***

I'm not sure I have post it in the past: blocks are not visible in the rendered scene and materials of blocks are ignored. Example: import an object with textures -> create a block -> insert this block several times -> render -> ...

Yeah I fixed this last night. They are in the scene, just not in the right location

It dosn't work here.