Tweet
Hello,
Having some problems rendering one particular scene angle.
Scene was rendering fine for preview purposes with DR(and on single machine) in resolution 2.5k x 2.5k, we started shelling out finals 5k x 5k and every shot we submitted to server was rendered just fine except one(cam_04).
Now to get into details.
It started to show error 999 and error 201 on every machine first on build from 11th of Jan and every other build up to 26th of Jan, Drivers were updated, camera was changed(new camera, same angle), scene was lightened up by removing things they are not necessary for that frame and still same.
Now, real problem is that those errors force disconnect GPU(checked with GPUZ, Afterburner and vray select openCL device)so that particular device is missing, like it is not plugged in at all, from 4GPU gets to 3GPU or from 3 to 2(well you get the picture).
Restarting affected machine is only solution.
Rendering starts fine, goes to initial pass and after about 80-90% of initial pass it just show errors above says something about possible different API, thread whatever.
Once again different camera angles renders just fine, lower resolution 2.5k x 2.5k renders just fine. Latest Drivers and many different builds tested, changed pcie extension cables, changed power outlets(FTW) it just won't render.
We averted disaster by using CPU for that frame, so it's kinda sorted out but kept me awake up to 3am trying to troubleshoot this.
Before i go with procedure of asking client if i can upload this here and i am about 100% sure they wouldn't allow it as its industrial design product visualization... Did you guys come across something similar that can cause this sort of problems?
Take care
Having some problems rendering one particular scene angle.
Scene was rendering fine for preview purposes with DR(and on single machine) in resolution 2.5k x 2.5k, we started shelling out finals 5k x 5k and every shot we submitted to server was rendered just fine except one(cam_04).
Now to get into details.
It started to show error 999 and error 201 on every machine first on build from 11th of Jan and every other build up to 26th of Jan, Drivers were updated, camera was changed(new camera, same angle), scene was lightened up by removing things they are not necessary for that frame and still same.
Now, real problem is that those errors force disconnect GPU(checked with GPUZ, Afterburner and vray select openCL device)so that particular device is missing, like it is not plugged in at all, from 4GPU gets to 3GPU or from 3 to 2(well you get the picture).
Restarting affected machine is only solution.
Rendering starts fine, goes to initial pass and after about 80-90% of initial pass it just show errors above says something about possible different API, thread whatever.
Once again different camera angles renders just fine, lower resolution 2.5k x 2.5k renders just fine. Latest Drivers and many different builds tested, changed pcie extension cables, changed power outlets(FTW) it just won't render.
We averted disaster by using CPU for that frame, so it's kinda sorted out but kept me awake up to 3am trying to troubleshoot this.
Before i go with procedure of asking client if i can upload this here and i am about 100% sure they wouldn't allow it as its industrial design product visualization... Did you guys come across something similar that can cause this sort of problems?
Take care
Comment