config vrscenes by extral vantage file issuse

[max_romju]

Hi boys
I have one problem:
I have many vrscene files exported by 3dsmax, and all of them will be configed some parameters in posttab and rendertab by one same extral vantage file ;
but every vrscene file has its own environment map. when I open .vantage file .the environment map info has been override .

any Helps?

[vladimir.nedev]

If I understand correctly, you must have saved the .vantage file with a non-default environment.

You can either resave the .vantage file, making sure the environment options are set to Mode="Texture", "<no environment file>, intensity=1
or open the .vantage file in a text editor and delete the entries starting with "env_".

What Vantage version are you using ? Is this a change in behavior from a previous version ?

Greetings,
Vladimir Nedev

[max_romju]

Vantage version:1.7 and 1.53
any vrscene with environment , then "File- open scene as config only ". the environment map clear.
my config vantage file has delete "env_image_path",

[max_romju]

My vantage File:

{ "image_options": {
"exposure": 0.0,
"hilight_burn": 0.20000000,
"apply_lut": 1,
"lut_amount": 0.5,
"lut_colorspace": 0
},
"options": {
"ambient_intensity": 0.0,
"enable_lights": 1,
"enable_light_tree": 1,
"light_tree_even_split_coeff": 0.5,
"light_tree_clamp_threshold": 0.10000000149011612,
"light_tree_num_samples": 1,
"global_light_mult": 1.0,
"global_light_mult_color": [1.0, 1.0, 1.0],
"use_shading_graphs": 1,
"use_shading_graphs_glossy_and_gi": 0,
"num_total_bounces": 15,
"enable_gi": 1,
"num_gi_bounces": 4,
"enable_refl": 1,
"enable_coat": 1,
"num_refl_bounces": 15,
"min_refl_glossiness": 0.0,
"enable_refr": 1,
"enable_transp_shadows": 1,
"enable_clip_opacity_maps": 1,
"num_refr_bounces": 15,
"enable_bump": 1,
"global_bump_mult": 1.0,
"num_area_light_samples": 1,
"light_rect_sampling_strategy": 0,
"env_use_texture": 1,
"env_color": [0.9100000262260437, 0.9559999704360962, 1.0],
"env_intensity": 1.0,
"env_clamp_tex_to_one": 0,
"env_tex_rotation": 0.0,
"env_tex_flip_hor": 0,
"env_use_importance_sampling": 1,
"bg_mode": 0,
"bg_color": [0.0, 0.0, 0.0],
"bg_mapping": 0,
"bg_rotation": 0.0,
"bg_fit": 0,
"bg_intensity": 1.0,
"bg_use_for_refr_and_mirror": 1,
"fog_enable": 0,
"fog_range_km": 10.0,
"fog_height_meters": 500.0,
"fog_start_meters": 0.0,
"fog_max_opacity": 1.0,
"fog_color": [0.40999465934233617, 0.6, 0.779995422293431],
"fog_enable_2": 0,
"fog_range_km_2": 0.5,
"fog_height_meters_2": 100.0,
"fog_start_meters_2": 0.0,
"fog_max_opacity_2": 1.0,
"fog_color_2": [0.779995422293431, 0.779995422293431, 0.779995422293431],
"clamp_sec_intensity": 1,
"max_sec_intensity": 20.0,
"lc_enabled": 1,
"lc_filter_primary_rays": 0,
"lc_cell_size": 0.001,
"lc_sample_limit": 1024,
"lc_retrace_threshold": 1.0,
"noise_threshold": 0.009999999776482582,
"active_pixels_overlay": 0
},
"additional_options": {
"lut_path": "C:/vr2/TomRenderShare/gooksu.cube"
},
"version": 1
}

[vladimir.nedev]

I think I understand, we will hopefully have a fix for this in the next release.

Greetings,
Vladimir Nedev

[max_romju]

1.71 is fine.Thanks