Glass bending or distorting stuff behind too much!

[Morne]

Hi all

In the attached pics you can see in the render that the glass is bending or distorting the stuff behind it too much. Look at my poor biped being stretched.

vieport is fine
the render
glass settings converted from standard material

I tried changing the IOR under refraction, but lowering the setting makes it worse, and increasing the setting makes it worse in opposite direction.

[LarsSonparsson]

Does your windows have thickness? If not, try to add shell modifier
to give it some.

If you windows does not have thickness, it will be rendered as big glass block.

-LarsSon

[rivoli]

does the glass have thickness, or is it just a one sided object?

edit:
what larsson said

[Undersky]

Also, remember to take the reflection all the way down to white and check "Fresnel". That way, the amount of reflection will vary based on the IOR and viewing angle, just like it should.

A glossiness value of 0.18 is way too low for glass. If you want glossy, then you probably shouldn't go lower than 0.9.

[Morne]

Does your windows have thickness? If not, try to add shell modifier
to give it some.
-LarsSon

I knew that, I was just testing to see if you know
Just kidding, thanks for the tip, that worked perfect!

Also, remember to take the reflection all the way down to white and check "Fresnel". That way, the amount of reflection will vary based on the IOR and viewing angle, just like it should.

A glossiness value of 0.18 is way too low for glass. If you want glossy, then you probably shouldn't go lower than 0.9.

Thanks I changed it as per your comments!

Thanks guys for the quick replies