Biggest Noctua cooler on the Asus Dual socket WS

Common Common :: Hardware
1

Hello everyone,

I am potentially looking into buying a really good cooling solution for a dual Xeon configuration. Summers get hot so I’d like to go as big as possible.

My question is, what is the largest (and most effective) Noctua cooling solution you can put on a dual Xeon rig on the Z10PE-D16 WS motherboard? Ram clearance is also important so lets say we got 8 out of 16 slots in use…

I’d really appreciate any and all opinions you guys have on this so feel free to chime in. Thanks in advance!

2

Are you sure you didn’t ask this before ? Or was it someone else wondering if they can fit NH-D15 twice :- ).

It’s Noctua UH-14S, or other slimmer heatsink with 140mm fans. Full clearance and powerful/silent.

I mean it’s possible to do water loop but hardly necessary :- ).

3

Sorry for the super later response!

Yeah I remember asking a similar question way back but that was a little more specific - whether the Noctua 15s can be mounted on a supermicro board.

NH-D15, as far as I can tell, can’t be fitted. UH-14 is also too big (by the looks of it) so the “top end” solution from Noctua would apparently be the UH-14S.

Don’t get me wrong, I know these CPUs are fine with smaller coolers but just for the sake of it … and because I could fit it into the budget … I am looking at the best option. Watercooling is out of the question - I am too afraid of leaks :smiley:

4

I am not aware there ever was any “U14” ? U14S, is single-fan heatsink, but second fan can be added. It doesn’t necessarily improve the cooling in this setup.

As you can see in my photo, the second fans could still fit just fine.

12kWebUse.jpg
12kWebUse.jpg2048×2048 432 KB

5

If anyone wants to get rid of their Noctua NH-D14 (with 2011 mounting kit), I’d be happy to buy it if the price is right :wink:

6

Thanks for the feedback!

Your photo Juraj was pretty much what I was looking at for reference :smiley:

7

Uh, reviving an old topic here.

Juraj, based on your image, are all the PCI-E slots fully usable with modern GPUs? That right heatsink seems to be hanging a little low there :smiley: