Ok lets say you have 3 licenses and you have a network server running it. It has a dongle. Now you want to buy an additional 3 licenses. Do you need a new dongle, or do you need to email in a new auth code?
Announcement
Collapse
No announcement yet.
When are we going to see vray 1.47.0(x>3)
Collapse
X
-
I seem to remember Autodesk having a lot of problems with dongles breaking back in the pre-r14 days, and having excessive wait-times for a replacement. It meant a lot of missed deadlines, and I wonder(hope) if this technology has changed since the last time I came across it.
Comment
-
If it is something like http://www.rockey.com.my/prod_dongle_rockey6.htm it would be flexible enough to add licenses, and hopefully a little more stable than the older generations of dongles.
Comment
-
well, then should we buy such software Rockey to use to Vray will be updated ?
Comment
-
Originally posted by vlado...The main reason we are switching to dongles is that will make porting of licenses a lot easier. Also, there will be no delay for email exchange in case you need to reinstall your machine because of hardware failures etc...
Comment
-
Gijs , you are absolutley right!
What happens with broken dongles?
In Architectural business ,waiting more then 3 days for a replacement of a broken dongle can be the complete way out of business - Architects don't understand when you tell them you can't work , because your software isn't working. (i know what i'm talking about!)
When Chaos is doing this step, then i hope they have done the homework and built up a network of local distributers. ... or will we get replacement dongles from Bulgaria?
Comment
-
Originally posted by DschagaGijs , you are absolutley right!
What happens with broken dongles?
In Architectural business ,waiting more then 3 days for a replacement of a broken dongle can be the complete way out of business - Architects don't understand when you tell them you can't work , because your software isn't working. (i know what i'm talking about!)
When Chaos is doing this step, then i hope they have done the homework and built up a network of local distributers. ... or will we get replacement dongles from Bulgaria?
Best regards,
VladoI only act like I know everything, Rogers.
Comment
-
So would this mean that we have to order dongles or are you going to ship them to us automatically?
Comment
-
I have been working with FormZ and Electricimage USB dougles for awhile, and they work very well.
They can be hot swapped accross machines, and follow software upgrades without problems (no-reuthorization, etc.)
Of course, you need to remember that those little thingies are actually worth it the whole software amount, so you can put in your pocket thousands dollar in software licenses...
They suggest to insure them, which you should.
I wish MAX would follow and adopt an hardware dougle...This is one reason I did not upgrade my workstation yet...Too busy to risk problem or delays with re-authorization and license transfers...
regards
Gio
Comment
-
im not sure where i would need to get my dongle from since im in barbados and have no idea where the nearest distributer is. i boughtvray back when it 1st came out over the internet and not through a dealer
---------------------------------------------------
MSN addresses are not for newbies or warez users to contact the pros and bug them with
stupid questions the forum can answer.
Comment
Comment